Can anyone out there draft good engineering drawings from existing CAD data? I know we have had offers before, if anyone is reading this who has already offered please get in touch again, with apologies – your offer was sincerely appreciated and now we are ready to take you up on it!
We have a virtual WW tail that we are ready to start building for real as a next phase after the rear fuselage, but it urgently needs the drawings produced as a CAD model alone doesn’t help our friendly neighborhood aeroplane builders. It’s a bit laborious and time consuming, Gunnar can’t do them as well as the actual virtual build as fast as they are going to be required going forward.
If anyone can potentially help I will put them in direct contact with Gunnar who can furnish the technical details. Thanks!
By: Rocketeer - 10th January 2019 at 16:57
Yes indeed Matt. Easier to get than a Whirly screen!
By: Beermat - 10th January 2019 at 08:25
Was it still a P-51 screen you were after for it? Eyes still peeled!
John, I’ll use that site – thanks for that tip-off!
Matt
By: Rocketeer - 9th January 2019 at 20:36
Remember i have an original whirlwind windscreen unit for swaps!
By: 12jaguar - 9th January 2019 at 20:00
some time ago we posted a request on the Do-It website and we got another CAD driver to assist us in addition to the Ste(i)rling help from Tempest V above. Worth an ask https://do-it.org/
John
By: TempestV - 9th January 2019 at 13:02
Hi Matt,
I’d gladly offer help, but I’m already supporting two other aircraft projects with CAD drawings!
Sign In
January 8, 2019 at 11:39 am