July 14, 2017 at 9:29 am
I got this at an auction a month back and I have been stripping down and cleaning the Swiss Buren clock inside.
The 4 blade prop has been cut down but the markings are for a B&C 6630. The top markings are P3.
I believe B&C refers to British and Colonial – later Bristol.
Looking at 4 blade props there are few with the blades turning this direction -except the F2B.
Can anyone confirm what aircraft type this prop was from originally ?
By: FarlamAirframes - 15th July 2017 at 10:24
Interesting stuff.
I apologise if raising the issue of F2B’s has been an interesting diversion.
I suppose my questions should have been phrased as – given the orientation of the blades and the B&C markings – what aircraft was this prop used on ?
By: Ant.H - 15th July 2017 at 10:10
You’re correct CD, there were some left-handed Falcons made with the intention of fitting them in a twin (can’t remember which type they were intended for). This wasn’t followed through with and the left-handers ended up going on to some F.2b’s. The RAFM Brisfit has just such an engine/prop, although it’s a two-blader. Can’t recall ever seeing one with a left-handed four-blader.
By: Creaking Door - 15th July 2017 at 01:49
Why on earth was a single aircraft type fitted with both right-handed and left-handed propellers for the same engine? Did some engines have reduction gears and some not?
Or were there right-handed and left-handed versions of the Falcon engine? I can’t think why that would be done unless they were intended to be used in pairs for a twin-engined aircraft (and then used in a F.2B instead)?
By: John Aeroclub - 14th July 2017 at 13:08
F.2B’s could be fitted with Falcons with even serial numbers which were Left handed and Right handed which were odd numbered, these being in the majority. The left hand props had a Blue band on each blade.
John