Looking for a supplier of rubber bobbin mounts suitable as instrument panel mounts. We need M6 thread with the threaded spindle being circa 15mm at each end. The rubber body section needs to be circa 24mm long in the body my a diameter of circa 24mm.
Anyone come across anything similar in the past?
Thanks
By: Aerial - 5th February 2015 at 22:17
I have used Polymax for similar a/v mounts in the past. http://www.polymax.co.uk/
By: Bruce - 5th February 2015 at 11:13
I had to make metric ones for a German aircraft project.
All gone now.
By: Sopwith - 5th February 2015 at 10:15
Is it for static or airworthy? If static a cheap fix maybe Austin/Morris Mk1 mini exhaust mounts.
By: windhover - 5th February 2015 at 09:51
Are these any use to you?…
[ATTACH=CONFIG]235118[/ATTACH]
They came from an immediately post-war BFP and measure approx. 21mm in length, and 31mm diameter. The threads are probably 3/8″, but they have the original nuts and washers.
Our BFP uses 6A/617 mounts so they are surplus to requirements.
Sign In
February 5, 2015 at 6:33 am