Project wants list, can you help?

Rich -can you PM me at some stage regards !

Hi all

The list is slowly getting shorter! But here is the latest updated list. So can anyone help with any of the following items all urgently needed for our various NON airworthy projects here in Leicester.

1) Instrument mounting clamps, 2 inch / 50mm diameter, 10 required.

2) Gipsy engine clinder barrel, just one to hang inside the cowlings.

3) Chipmunk Starboard wing fillet front leading eadge, cuff panel.

4) Chipmunk windscreen.

5) Chipmunk parachute pack type S Mk.2.

Many thanks,

I think i’ve got some clamps. Will check.

Hi all

Can anyone help with any of the following items all urgently needed for our various NON airworthy projects here in Leicester.

1) Instrument mounting clamps, 2 inch / 50mm diameter, 10 required.

2) Chipmunk spinner.

3) Chipmunk Spinner back plate.

4) Chipmunk Starboard wing fillet front leading eadge, cuff panel.

5) Chipmunk windscreen.

6) Chipmunk parachute packs type S Mk.2. 2 wanted.

Many thanks,

The Metheringham Airfield Visitor Centre is looking to purchase a Wartime Female WAAF uniform for museum display. If any one can help then I’d be very grateful if you could kindly PM me. Thanks

Hi all

Can anyone help with any of the following items all urgently needed for our various projects here in Leicester.

1) Instrument mounting clamps, 2 inch / 50mm diameter, 10 required.

2) Chipmunk spinner.

3) Chipmunk parachute packs type S Mk.2. 2 wanted.

Many thanks,

Chipmunk Spinner

Hi

It may be of no use whatsoever, but i have what i am told is a Super Chipmunk spinner, in very good order, although without any paperwork.

Just thought that if you guys were discussing Chippies with other owner / operators it might be on someones list?

Happy to talk re swops, although XS186 is now complete, we still look out for JP service spares and RAF ground equipment?

Paul
XS186 Crew

chipmunk spinner.

Hi, I know this is an old thread, but I am also looking for a spinner. Did you have any luck, and do you have any idea where I may source one?

cheers Bill.

Help locating any of the following required.

Hi all

Can anyone help with any of the following items all urgently needed for our various projects here in Leicester.

1) Instrument mounting clamps, 2 inch / 50mm diameter, 10 required.

2) Chipmunk engine bearers (any condition / non airworthy) anything at all considered!

3) The light unit to fit around the slip ball on Max’s Wessex panel, see post no 6.

4) Chipmunk spinner.

5) Chipmunk engine oil tank mounting straps.

6) Chipmunk harness straps (anything at all considered /non airworthy).

7) 2 pin ground power plug, NOT the socket mounted on the aircraft.

8) Chipmunk parachute packs type S Mk.2. 2 wanted.

9) Any Chupmunk firewall / engine bay parts considered. All we have is an oil tank and exhaust at the moment.

10) Altimeter Mk XIV, 6A/3380.

11) Undercarriage Position Indicator, Type D.1, 5CX/5164.

12) Spring loaded switch guards for a Vampire T.11 panel, 1 x 2 possition and 2 x 3 possition anything at all considered.

Many thanks,

The single seat version is on ebay; I’m looking at it!

2 seat version not

The single seat version is on ebay; I’m looking at it!

2 seat version not

Thanks Wyvernfan.

Thanks Wyvernfan

I will look into it.

Thanks Wyvernfan.

Thanks Wyvernfan

I will look into it.

Hi Guys

Here is yet angther updated list, of items urgently needed for our various projects.

12) Guns / RP rotory selector for a Vampire.

Many thanks,
Ritch and Max.

I’m sure there was one of these on Ebay!

Hi Guys

Here is yet angther updated list, of items urgently needed for our various projects.

12) Guns / RP rotory selector for a Vampire.

Many thanks,
Ritch and Max.

I’m sure there was one of these on Ebay!

Yet another wants list!

Hi Guys

Here is yet angther updated list, of items urgently needed for our various projects.

1) Instrument mounting clamps, 2 inch / 50mm diameter, 10 required.

2) Chipmunk engine bearers (any condition / non airworthy) anything at all considered!

3) The light unit to fit around the slip ball on Max’s Wessex panel, see post no 6.

4) Chipmunk spinner.

5) Chipmunk engine oil tank mounts.

6) Chipmunk harness straps (anything at all considered /non airworthy).

7) 2 pin ground power plug, NOT the socket mounted on the aircraft.

8) Chipmunk parachute packs type S Mk.2. 2 wanted.

9) Any Chupmunk firewall / engine bay parts considered. All we have is an oil tank and exhaust at the moment.

10) Altimeter Mk XIV, 6A/3380.

11) Undercarriage Position Indicator, Type D.1, 5CX/5164.

12) Guns / RP rotory selector for a Vampire.

Many thanks,
Ritch and Max.

Yet another wants list!

Hi Guys

Here is yet angther updated list, of items urgently needed for our various projects.

1) Instrument mounting clamps, 2 inch / 50mm diameter, 10 required.

2) Chipmunk engine bearers (any condition / non airworthy) anything at all considered!

3) The light unit to fit around the slip ball on Max’s Wessex panel, see post no 6.

4) Chipmunk spinner.

5) Chipmunk engine oil tank mounts.

6) Chipmunk harness straps (anything at all considered /non airworthy).

7) 2 pin ground power plug, NOT the socket mounted on the aircraft.

8) Chipmunk parachute packs type S Mk.2. 2 wanted.

9) Any Chupmunk firewall / engine bay parts considered. All we have is an oil tank and exhaust at the moment.

10) Altimeter Mk XIV, 6A/3380.

11) Undercarriage Position Indicator, Type D.1, 5CX/5164.

12) Guns / RP rotory selector for a Vampire.

Many thanks,
Ritch and Max.

Hi I have a rear inst panel, prop hub, exhaust, induction system and sectioned major engine available. If any of that helps please pm me.

Regards Jon

Hi I have a rear inst panel, prop hub, exhaust, induction system and sectioned major engine available. If any of that helps please pm me.

Regards Jon

Always worth keeping an eye on ebay guys, as recently Chippie parts have been popping up quite often!