Am trying to get hold of a pair of cables for the 100A inverters in my Hunter cockpit; hopefully with these I could get one or both inverters running to power the AC flight instrument(s) after renovating the ACJB.
Don’t have the part numbers but they are about 12″ long and have 5-pin receptacle plugs on each end – basically they have exactly the same connector on each end.
Attached is a photo of one of the inverters in-situ and shows the connectors I need the cable sets for.
If you can help please PM me via the forum.
Thanks.
By: Arabella-Cox - 29th March 2008 at 18:22
Hello Peter, thanks for the reply.
My Hunter 4 ‘pit is almost complete – just need some very obscure bits to complete like a few Bowden cables and suchlike; oh and a complete nose section from Fr.3 through Fr.6 would be nice too 😉
Just got some interior painting to do before I refit the seat, and then get stripping the nasty phonebox red paint off the outside.
Will be at Cockpitfest and if you’re there pop along and say hello.
Mark.
By: Peter - 29th March 2008 at 18:08
XF940,
I do not have any cables but I do hope you find some as it sounds an interesting project! There is a hunter centre start panel on ebay this morning if you need one or parts for one…
Sign In
March 29, 2008 at 5:36 pm