I am looking for a number of parts & instruments etc, for a couple of panel/cockpit projects.
One is an extinct WW1 type, the other is an extinct WW2 type.
Some of the parts I require are –
HOLTS LANDING LIGHT PUSHBUTTON SWITCH “MK II ?” (PHOTO BELOW).
ROTHERHAM AIR PUMP.
ROTAX HANDPUMP.
ROTAX NUMBER 21 FUEL C0CK/TAP.
AGS HANDPUMP.
No 8 SWITCHBOX (PHOTO BELOW).
MK IVa AIRSPEED INDICATOR (PREFERABLY READING IN KNOTS).
MK V AIRSPEED INDICATOR.
MK VI AIRSPEED INDICATOR.
MK IA TEMPERATURE GAUGE (PHOTO BELOW).
MK V OR VI OIL TEMP GAUGE.
MK IVa RPM GAUGE (READING UP TO 2200 RPM).
MK V RPM GAUGE.
MK VI RPM GAUGE.
MK V INCLINOMETER.
PETTY AIR RELEASE VALVE.
JONES AIR RELIEF VALVE.
GAUGE FOR JONES RELIEF VALVE (READS UP TO 5lb’S PRESSURE).
TYPE ‘A’ CLINOMETER “FORE & AFT LEVEL” (ADMIRALTY MK II) 6A/60 OR 6A/129.
DOVER TYPE STEERING WHEEL (WARP WHEEL) AS FITTED TO SOPWITH BABY ETC ETC.
TYPE 1963 R.A.F MORSE KEY.
BOOST GAUGE MK I.
BOOST GAUGE MK II.
VICKERS FUEL C0CKS “EARLY TYPES”.
ALTIMETER MK XIV 6A/577 OR 6A/578.
BOOST GAUGE MK IIIC 6A/699 OR 6A/701.
FUEL GAUGE, SMITHS TYPE MK II “90 GALLON TYPE” (READING EITHER- 10 30 60 90 OR- 10 30 60 80 90.
2 WAY SWITCH UNIT ETC FOR ABOVE 6A/647.
OIL PRESSURE MK IXE OR IXC (HARD TO READ ON PHOTO).
OIL TEMP TRANSMITTING TYPE MK IA.
ARTIFICIAL HORIZON MK I 6A/599 OR 6A/1289.
DIRECTION INDICATOR MK I.
ENGINE SPEED INDICATOR MK IIC “1600-3200 RPM” 6A/442 OR 6A/476.
RATE OF CLIMB MK IA 6A/618.
RATE OF TURN TYPE B MK IA.
BLIND FLYING PANEL MK IA 6A/616.
AIR TEMP TRANSMITTING TYPE MK II OR MK III.
CYLINDER (ENGINE) TEMP MK I (WESTON TYPE).
VACUUM PUMP SELECTOR C0CK.
EARLY AGS PARTS (TURNBUCKLES ETC ETC).
HAWKER HENLEY PARTS.
Also looking for suitable instruments, parts & drawings etc for my Snipe repro, & a Hawker Hector panel (see photo below) etc.
I have the following items available to exchange-
REMAINS OF THE AXLE & WHEELS FROM THE CODY V WHICH WON THE 1912 MILITARY TRIALS.
AVRO 504K TAILPLANE (ROUGH).
AVRO AVIAN WING FILLETS (FOLDING MECHANISM COVERS ?).
WW1 FARMAN LONGHORN/SHORTHORN ELEVATOR CONTROL ARM.
WW1 MAGNETO FOR AN RAF 4A ENGINE.
MAGNETO FOR AN EARLY SALMSON AERO ENGINE.
WW1 AMERICAN STARTER/BOOSTER MAGNETO.
P3 COMPASS (BRISTOL BULLDOG ETC).
1920’S FORE & AFT LEVEL (CLINOMETER) FROM AN IMPERIAL AIRWAYS AIRLINER (HP 42 ETC).
1920’s-1930’s INCLINOMETER.
BRISTOL JUPITER GAS STARTER DISTRIBUTER.
HUSON COMPASS.
TYPE 223 COMPASS (INCOMPLETE).
EARLY AERO-ENGINE SPARKPLUG SERVICE/TESTING STATION.
WW2 AMERICAN (SCHWIEN) VACUUM OXYGEN REGULATING VALVE.
WW2 AMERICAN OXYGEN REGULATOR.
WW2 ENGINE SPEED INDICATOR MK IIB 6A/393.
WW2 ASI MK IXG* (KNOTS).
WW2 SPITFIRE UNDERCARRIAGE LOCK PART ? # 30008 2171 (DAMAGED)
WW2 AMERICAN COCKPIT LAMP.
WW2 ? DH CONSTANT SPEED CONTROL.
WW2 AMERICAN RADIO (TRANSMITTER TUNING UNIT) TYPE TU-6-B.
4 WHEELS & TYRES “FAIREY BARRACUDA/BLACKBURN FIREBRAND ETC”.
1950’S SELECTOR SWITCH.
+ a few other odds & soddits.
Bob T.
By: FLY.BUY - 17th September 2015 at 15:43
Hi, I have a RAF Domine (HS125) control yoke with history, would like to swap for another yoke.
By: Junk Collector - 17th September 2015 at 12:00
I am tring to find one of these HSI’s for my F4F Phantom panel if anyone can help please ! any condition
By: coldkiwi1 - 17th September 2015 at 10:35
I have almost completed a Me 109e main instrument panel, but still need a few bits:
1. Pitot warning light ( mounts below mag switch)
2. Gunsight plug ( mounts in centre of panel)
3. Prop pitch control unit
4. 700kmh airspeed indicator ( have 500 kmh ASI )
Happy to buy or trade – I have quite a few spare English and American instruments plus some Japanese.
Would appreciate any leads or contacts.
Thanks
Mike
By: Wyvernfan - 17th September 2015 at 07:34
A friend of mine has a Nord 1102 (Me 208) project to swap, trade etc. Anyone interested can email me at the address below and I’ll happily forward his contact number and email to you.
Rob
By: Wyvernfan - 13th September 2015 at 16:51
Looking to swap a Canberra MB ejection seat rail with history measuring around 5′ 3″ long – for a similar rail from a Mk1 or Mk2 seat but measuring around 4′ 5″ long.
If all else fails I might have to cut down the Can’ one, but would rather not if possible!
Rob[ATTACH=CONFIG]240503[/ATTACH]
By: QldSpitty - 23rd April 2015 at 01:04
Have some replica Spitty bits available.
http://www.shapeways.com/shops/spit?s=12#more-products
By: ian_ - 22nd April 2015 at 23:05
I’ve made a few labels and parts for my Spit panel. There are sometimes spares…
By: Aircraft - 22nd April 2015 at 21:44
Seeking any fluorescent instruments suitable for a spitfire panel, as well as original spitfire parts suitable for static display please.
By: dylan9391 - 22nd April 2015 at 20:15
Hello, I have the following instruments for sale or exchange as I continue with my Spitfire replica build. I am looking for cockpit items either original or replica. Things like the spitfire gun sight bulbs and holder or the crowbar for example. other items are things like the start button or the fuel pump primer. Not other instruments.
[ATTACH=CONFIG]236919[/ATTACH][ATTACH=CONFIG]236920[/ATTACH][ATTACH=CONFIG]236921[/ATTACH][ATTACH=CONFIG]236922[/ATTACH]
By: spitfireman - 20th April 2015 at 18:45
…eh?
Baz
By: RichyD - 20th April 2015 at 12:52
Yes
Is that you Baz?
By: sopwith.7f1 - 20th April 2015 at 10:12
So you got it then??
Yes
By: 12jaguar - 20th April 2015 at 07:31
So you got it then??
By: RichyD - 19th April 2015 at 21:02
Evening all,
Anyone have any leads to Vampire T11 canopy perspex? I need both left and right and the front screen too.
Any help would be great.
Richy.
By: QldSpitty - 15th April 2015 at 05:29
Looking for a Spitfire Rudder Trim wheel sprocket please guys.
By: Arabella-Cox - 14th April 2015 at 22:20
Can you help with locating the following stick tops (with prices) please?
JP3, JP5 and Harrier GR-7
Need to be in tidy condition but not as-new.
Anon.
By: alphacharlie - 14th April 2015 at 21:01
Evening all.
i am searching for the following
2 x Overwing pylon carriers for a Jaguar
Radio Altimeter MOD part number 5841-99-646-2300
Martin-Baker Mk.4 survival pack (Lightning F6)
Thanks in advance
By: 12jaguar - 14th April 2015 at 12:24
Hi Bob,
Nearly got excited there, we’re after one of the larger D/F loop fairings :apologetic:
John
By: sopwith.7f1 - 14th April 2015 at 10:19
Approximate dimentions for the above are-
25″ long x 9″ in diameter x 8.5″ high.
Bob T.
By: sopwith.7f1 - 13th April 2015 at 23:24
Another item I have available for exchange “believed to be from a Wellington”.
It was undamaged when I bought it, but the Hermes delivery guy decided to chuck it over my neighbours fence whilst I was at work, which resulted in the large crack.
Sorry for the poor photo’s, I’ll try to take some better ones.
Bob T.
Sign In
June 26, 2013 at 2:31 pm