Hi all, we need a small piece (2 ft by 2 ft would do) 2024 T O sheet, .100 thou thick. Does anyone here have an offcut we could obtain? I’ve only found one sheet over here, 12 ft by 10 ft and megga huge £££££££££££. Given that this is the only piece of .100 thou on the entire aeroplane I’m hoping to find an offcut rather than buy a full sheet that we’ll never use in a hundred years.
Many thanks,
G
By: Firebex - 8th March 2011 at 22:38
Got some and also 2024 T3 but no paperwork.
Mike
By: ZRX61 - 8th March 2011 at 18:54
I have pieces that big, but not that thick… & the only piece I have that’s big enough is 7/16in thick…& probablt the wrong type.
By: bloodnok - 8th March 2011 at 18:40
Plenty of thin stuff with docs. Nothing anywhere near that thick though!
By: Arabella-Cox - 8th March 2011 at 18:36
in a word probably yes down at brunty as long as you don’t need it with a C of C and batch number, i obtained a load of structures bay scrap pieces from work and as it’s quite a common one it should be amongst them if you PM us i’ll let you have my phone number and then if you give us a bell on Saturday i’m at bruntingthorpe and i’ll look in the supplies for you
As long as you can collect your welcome to it, and you’ll just owe us a favour whats it for by the way
By: JT442 - 8th March 2011 at 18:36
Give these guys a call, they will have some BUT they are NOT an approved aircraft supplier if it is for an airworthy beast. The metal is cheap and they may have off cuts.
Sign In
March 8, 2011 at 5:30 pm