Beverley Instrument Panel

Many thanks for the additional information Brian and for your offer of support, which is appreciated.

Are you around for the Aeroboot / Aerojumble on October 17th? If you are I’ll arrange for a pass to be left for you!

Howard I am happy to support NAM in whatever way possible!

I have had it confirmed from the previous owner that this is from XB244 when it was being dismantled at Chalgrove.

I realise that this is lucky for NAM and a very generous offer from Brian. NAM is also appreciative of his support for Cockpit-Fest over the years and thank him and his wife for that as well! 🙂

Already accepted Rob – please see post #6 and via email off-board! 😉

And delivery included… You are a lucky boy! 😮

But also well done to Brian for this.

Rob

Howard I have to travel down to Leics in mid Oct so will drop it off at museum then.

Already accepted Rob – please see post #6 and via email off-board! 😉

I’d snap Brian’s hand off, Howard. What are the chances of that turning up again 😮

Rob

For completeness – where it appears to go!

Sounds like a good result all round, well done!

Rob

I couldn’t see it when I was taking the pictures Brian – usual ‘hectic’ day at NAM I’m afraid!

Also a yes please to the panel offer, many thanks. :eagerness:

Howard email sent back it is a perfect match for the port upper middle panel that you have as a blank.

Do you want it foc ?

Brian I’ve just emailed you some pictures but I’m not sure whether they will help – nothing obvious that matches on XB261!

The only area that is not possible to access (Perspex screen in the way) is the pilot / co-pilot part of the cabin!!

Thanks Howard – much appreciated.

When cleaned the panel reads MOBX Z with the Z painted over and a U underneath.

Hi Brian,

I would have replied earlier but I’ve struggled to get on the forum all afternoon!

I’m over at NAM tomorrow so I’ll see what I can find for you. I’ve taken a screen grab of your panel and I’ll see what I can find on XB261.