bits and bobs up for grabs

ALL,

I HAVE SOME STUFF HERE UP FOR GRABS.

1 A PAIR OF RUSTY LINCOLN MERLIN ENGINE BEARERS PLUS A PIECE OF BULKHEAD AND A COUPLE OF RUSTY MERLIN EXHAUST HEAT SHIELDS.

2 A PAIR PLUS ONE SINGLE MERLIN ENGINE BEARERS FROM BALLIOL TYPE AIRCRAFT. NOT TOO RUSTY, A FEW DINGS AND DENTS.

I WOULD PREFER THESE TO GO TO AN ENTHUSIAST WHO WILL DO SOMETHING CONSTRUCTIVE WITH THEM -THEY ARE A BIT RUSTY BUT A LIGHT BLASTING AND A COAT OF PAINT WOULD GIVE THEM A NEW LEASE OF LIFE. YOU COULD EVEN WELD IN SOME REPAIR SECTIONS OF THE CORRECT GRADE OF STEEL TUBE TO MAKE THEM GOOD. IF PROPERLY REPAIRED THEY MAY BE CAPABLE OF TAKING A STATIC ENGINE WHICH WOULD BE A GREAT IMPROVEMENT ON A LOT OF THE ENGINE STANDS YOU SEE AROUND. ALL THE BEARERS ARE MISSING THE FORGED END PIECES WHICH BOLT TO THE FIREWALL/BULKHEADS.

SEND ME A PRIVATE MESSAGE IF YOU ARE INTERESTED. MANY THANKS

LOCATED MID LINCOLNSHIRE…

THE LARGEST PARTS ARE THE LINCOLN BEARERS WHICH ARE ABOUT 6 FEET LONG BY ABOUT 3 FEET BY ABOUT 18 INCHES. ESTATE CAR / TRAILER / VAN TO TAKE AWAY…

MANY THANKS