G’day everyone. I just wanted to check I have the correct dimensions for a flat topped BFP, can someone confirm please.
Width 12″, Height 10 5/8″, Bottom mounting hole centres 1″ from the side, 1″ from the bottom and therefore 10″ apart, Top mounting hole centre 10″ from the bottom and 4 3/4″ from the right hand side.
Thanks Paul
By: Versuch - 12th April 2015 at 08:59
PM sent.
By: ozjag - 12th April 2015 at 05:15
Hi Mike
Here is what the BFP looks like, it even has a small bit cut out of the top edge. I get the feeling that these were only used in the Mk31 with the Mk30’s having a curved top and different instrument arrangement. Actually my main concern at the moment is to make sure the 3 mounting holes are in the correct place so that I can fit it into my main panel later without any problems.
Cheers Paul
By: Versuch - 12th April 2015 at 02:29
Ah, I will try and investigate…
By: ozjag - 12th April 2015 at 02:27
Hi Mike
It’s for an Aussie Mk31 Lincoln, I don’t know the stores ref as info on these is very scarce, I’m mainly working from photos and a little Lanc stuff. What part is incorrect.
Thanks Paul
By: Versuch - 11th April 2015 at 23:16
Hi Paul….is that 6A/616 ?
If so its not correct.
Cheers Mike
Sign In
April 11, 2015 at 3:59 pm