Cockpit Parts Wanted (Merged Thread)

I am looking for the proverbial hen’s teeth with this one but does anyone know or have onoe of these Tacan panels available?

Hi there i dont think its the same, we have found a brand new hatch now, many thanks for replying, We do require the following for our Canberra TT18
mk29b altimeter
Rudder trim dial
Oxygen regulator mk 17f units X2
Pilots ejector seat rail
If anyone has any leads to find any of these please make contact,
Many thanks Matt;)

Hello all, I’am requireing your help in locating a Nav hatch for a our Canberra TT18, there must be one out there somewhere?
Cheers Matt;)

Is this hatch the same as PR9

JP T3A parts wanted

Can anyone assist in locating a blind flying panel for a JP T3A with or without
instruments

Anyone got a spare 1 1/2″ flare pistol mounting bracket? Also in need of a A.M (Spitfire) Crowbar, any help would be greatly appreciated.

Hello Austernj673

I faced the same search for a crowbar for the Hornet and Vampire myself, and being unable to find one, I am making a small batch of spitfire type crowbars shortly. I borrowed an original and made a drawing. The steel has already been bought, and these will be made in the correct 3 pieces and right sizes of material. I should have several sets of clips too.

Please send me your contact details to: [email]dcollins103@hotmail.com[/email]
and we’ll see if I can help you?

Hmmm maybe if you can steal a hunter one and copy it in three sections..I can send you over a hacksaw!!

Spitfire crowbar is in 3 sections Ross! The spike, the jemmy and the tube, Hunters are solid steel

ahh, I see XM692, well XN299, is a complete aircraft, so i would not have room or money for that, as for XJ758, i never realised she May be up for disposal ??

Merkle

firstly i must apologise it has taken so long for a reply..ive been without the internet for a few months

Regarding the Whirlybird “iron Chicken”, if i remember correctly it has now been assigned to the Royal marines for restoration?

Scott

Also in need of a A.M (Spitfire) Crowbar, any help would be greatly appreciated.

I think a vampire one is similar but in three sections.

Anyone got a spare 1 1/2″ flare pistol mounting bracket? Also in need of a A.M (Spitfire) Crowbar, any help would be greatly appreciated.

Hello all we are in need of your help ,to help us find the missing dials for the main instrument panel for WH887 😮

Mk29b Altimeter dial
Rudder trim dial
This is the confusing bit …we need a Canberra T22 artificial horizon.
If anyone can help please get intouch
All the best Matt;)

I have an unpleasant feeling of Deja-vu about the way this thread is progressing. :rolleyes: I can see it all ending in tears and tantrums again,

Dont worry, there will be no tantrums etc, on my part ever again ;).

I just put the feelers out, you all know now, so there will be no need for me to Carp on about it, 🙂

I now need to do more work behind the scenes, I will let you know of any developements,

Unipren is getting pretty difficult to find – I use a similar sized wire from RS, but that has a higher current rating.

However, one step at a time!

Bruce

Indeed, so in the spirit of keeping things moving….

Mark, those cables are on my Vampires – one on each, so right now, I cant help. However, let me see if I can find any plugs and we can make new ones.

Bruce

Bruce,

Understood & no problems. Plugs would be excellent, though also need some fairly hefty Unipren (not sure of the spec) as the MA’s pull quite a lot of current especially at start. The cables are pin for pin so no issues in making them up with the right bits.

Mark.

Indeed, so in the spirit of keeping things moving….

Mark, those cables are on my Vampires – one on each, so right now, I cant help. However, let me see if I can find any plugs and we can make new ones.

Bruce

I have an unpleasant feeling of Deja-vu about the way this thread is progressing. :rolleyes: I can see it all ending in tears and tantrums again,

I don’t recall saying that. Where did i say that ? If you don’t ask people, you’ll never know. You can’t expect these things to come to you :rolleyes:

.

er Yep sorry, I prosumed again :o, I know you cant expect these things to come to you, But I actually dont know who owns it, all I know is it is at a place called welshpool,

I HAVE been busy behind the scenes, The Forum, is only one of my tools to ask, ;):)

…. as for XJ758, i never realised she May be up for disposal ??

I don’t recall saying that. Where did i say that ? If you don’t ask people, you’ll never know. You can’t expect these things to come to you :rolleyes:

.

He’s referring to XN299. Or how about the cockpit of XJ758 ? Photo’s of both are on Demobbed.

.

ahh, I see XM692, well XN299, is a complete aircraft, so i would not have room or money for that, as for XJ758, i never realised she May be up for disposal ??

Tell me More Scott, 😀

He’s referring to XN299. Or how about the cockpit of XJ758 ? Photo’s of both are on Demobbed.

.