December 16, 2008 at 12:17 pm
Some of you have downloaded some Harrier books I have recently uploaded to the web, and some more of you recently downloaded the Brown Brothers catalogue.
I am scanning another Harrier one at the moment, but in the meantime, I thought I would offer one I prepared earlier…..
This is a high quality scan of the Vampire T-11 Vol1. Scanned by myself, from a book in my own personal collection. I would rather not see it appear for sale on Ebay, but hopefully by offering it for free, I won’t have to!
No guarantees as to completeness, or how up to date it is. That said, it came from a collection of books used by the Vintage Pair, so its probably pretty good. Use of the information is entirely at your own risk!
Here are the links – some sections are short; some are much longer, and expect file factory to make you spread it out over several sessions!
http://www.filefactory.com/file/c37aa2/n/T11_Introduction_pdf
http://www.filefactory.com/file/073b57/n/T11_Section_1_Controls_and_Exits_pdf
http://www.filefactory.com/file/4b9ed0/n/T11_Section_2_Ground_Handling_pdf
http://www.filefactory.com/file/36e04a/n/T11_Section_3_Airframe_pdf
http://www.filefactory.com/file/88c952/n/T11_Section_4_Power_Unit_pdf
http://www.filefactory.com/file/42b27e/n/T11_Section_5_Electrical_pdf
http://www.filefactory.com/file/ea5b86/n/T11_Section_6_Radio_pdf
http://www.filefactory.com/file/c379c2/n/T11_Section_7_Armament_pdf
Happy Christmas!
Bruce
By: Peter - 13th January 2009 at 21:20
Bruce are you aiming for the longest thread title??( dons tin helmet, hides behind desk)
By: Bruce - 13th January 2009 at 21:06
‘only’
youth of today; when I were a lad we had to put up with 32K…..
Bruce
By: XH668 - 13th January 2009 at 20:51
i have 2 and 1/2 manuals and the folder with them all in is only 1.15GB
By: Bruce - 13th January 2009 at 20:40
Yes it can – each manual is about 1GB
Bruce
By: Peter - 13th January 2009 at 20:01
Bruce how big are the complete files? Wondering if it can be saved onto a removable drive?
By: Bruce - 13th January 2009 at 15:53
Bump – all of Sea Venom manual now up.
Bruce
By: Bruce - 12th January 2009 at 16:42
As promised, here is the Sea Venom manual – Fill yer boots!
http://www.filefactory.com/file/a018dhg/n/AP4360B_-_Introduction_pdf
http://www.filefactory.com/file/a018ecc/n/AP4360B_Section_1_-_Controls_and_exits_pdf
http://www.filefactory.com/file/a01b134/n/AP4360B_Section_3_-_Airframe_pdf
http://www.filefactory.com/file/a01b32f/n/AP4360B_Section_4_-_Engine_Installation_pdf
http://www.filefactory.com/file/a01b89h/n/AP4360B_Section_5_-_Electrical_Installation_pdf
http://www.filefactory.com/file/a01bb47/n/AP4360B_Section_6_-_Radio_Installation_pdf
http://www.filefactory.com/file/a01ae60/n/AP4360B_Section_7_-_Armament_pdf
That’s all of that one!
TTFN
Bruce
By: Die_Noctuque - 10th January 2009 at 23:56
Probably for fear that in the current economic situation you wouldn’t be able to find a bank willing to loan you the money to buy one – they sound expensive :diablo::diablo:
Roger Smith
Actually many basic office copiers these days have the capability..it’s just a case of knowing someone able to unlock it’s potential with the right bit of software ๐
Being a copier service engineer has it’s advantages! ๐
By: RPSmith - 10th January 2009 at 22:27
Why havent i been told about these :rolleyes: ๐
Probably for fear that in the current economic situation you wouldn’t be able to find a bank willing to loan you the money to buy one – they sound expensive :diablo::diablo:
Roger Smith
By: XH668 - 10th January 2009 at 21:13
No,
I have access to an automatic sheet feed scanner, which takes paper in one end, and spews .pdf’s out of the other. I can leave it to run while I’m working.
Why havent i been told about these :rolleyes: ๐
By: Bruce - 10th January 2009 at 21:10
No,
I have access to an automatic sheet feed scanner, which takes paper in one end, and spews .pdf’s out of the other. I can leave it to run while I’m working.
Sorry, I dont have any Miles stuff at all – but it was worth asking!
Sea Venom on Monday!
Bruce
By: XH668 - 10th January 2009 at 10:23
awesome………..many thanks again ๐
Yep well said, cheers bruce. You muct have a bit of time on your hands doing all of that
Thanks ๐
668
By: galdri - 10th January 2009 at 01:24
Bruce,
You wouldnยดt happen to have a parts manual for the Miles Gemini in your archive do you;):D
By: ausflyboy - 10th January 2009 at 01:13
awesome………..many thanks again ๐
By: Bruce - 7th January 2009 at 09:39
Well, nearly 60 people now have the complete manual, and nearly 100 have some of it. I hope it is proving to be of use.
I’m still scanning the Harrier stuff, and it isnt such good quality, so bear with me on that.
In the meantime, I thought you might enjoy the Venom FB4 manual – not so much use to restorers as there arent many of them around, but interesting all the same.
Here are the links:
http://www.filefactory.com/file/84dd88/n/FB4_Introduction_pdf
http://www.filefactory.com/file/d14e84/n/FB4_Section_1_Controls_and_exits_pdf
http://www.filefactory.com/file/d156c6/n/FB4_Section_2_Ground_Handling_pdf
http://www.filefactory.com/file/470cb0/n/FB4_Section_3_Airframe_pdf
http://www.filefactory.com/file/d17bee/n/FB4_Section_4_Engine_Inst_pdf
http://www.filefactory.com/file/7a5c84/n/FB4_Section_5_Electrical_pdf
http://www.filefactory.com/file/46f151/n/FB4_Section_6_7_Radio_and_Armament_pdf
More to come as I get sorted!
Bruce
By: bearoutwest - 27th December 2008 at 23:21
Bruce,
Many thanks for making the scans available. I’m enjoying “e-thumbing” through the many cutaway diagrams.
Regards, …geoff
By: anthony - 24th December 2008 at 13:50
Hi Bruce thank you for the Vampire manual download. I have just finished downloading all the chapters and they make fascinating reading.
thank you again
Anthony
By: sagindragin - 23rd December 2008 at 12:20
hi bruce,
try rapidshare.com, better and faster, dowmloading the airframe manual as i type, will work wonders for me whem i start drawing one.
thank you
By: ausflyboy - 22nd December 2008 at 10:32
Thanks bruce for a fantastic download ๐ Had no problems downloading it on this side of the pond.
Merry Christmas all,
Chris
By: Bruce - 22nd December 2008 at 08:50
There are about four sections down at present.
There is nothing I can do at present – I failed to upload some stuff last week; must be the same problem. Lets leave it until after Christmas, and if it hasnt resolved, I will find a different supplier.
Bruce