I’m restoring a set of Hurricane rudder pedals for my cockpit project and can’t find a rubber sleeve for the upper portion of the actual pedal. See the link below. Surely someone has come across a solution for this and would be willing to point me in the right direction.
Please and Thank you!
Ron Taylor
https://www.dropbox.com/s/huzchpaadu0jviu/15178948_10154298076544862_7782780157432665480_n.jpg?dl=0
By: Jag248rpa - 5th December 2016 at 22:14
That’s exactly what I’m looking for. Thank you for the link.
Cheers!
By: windhover - 5th December 2016 at 11:27
What you’re looking for is probably Contractors Black Fluted Water Hose (or at least, that’s what it’s called in the UK.)
Have a look at:
http://www.copely.com/fluted-water-hose
Trouble is; it tends to come in 40 metre coils.
if you have any contacts in the construction or agricultural game they might chop a bit off for you.
[ATTACH=CONFIG]250083[/ATTACH]
By: QldSpitty - 4th December 2016 at 23:32
You need this stuff..
https://sugru.com/about
By: Jag248rpa - 4th December 2016 at 18:08
Thanks Tony. I’ll give them a try.
By: Rocketeer - 4th December 2016 at 09:46
They are same as typhoon. I used to have a few. The jet age chaps might have some. If you are really stuck, I might be able to cast some
By: Jag248rpa - 3rd December 2016 at 21:23
Yes, and they are a good alternative. I’m hoping to find something with the grooves.
Thanks
By: windhover - 3rd December 2016 at 21:01
Have you tried car heater hose lengths of a suitable inner diameter
?
Sign In
December 3, 2016 at 7:38 pm