Items Wanted For Projects

2 inch panel clamps.

Hi all

Max is still desperate to find some impirial / 2 inch diameter, instrument panel clamps.

He needs about 10, but anything, including damaged ones would help.

Thanks in advance.

Ritch.

AP’s wanted

Looking for copies of the following A.P’s can anyone help.

A.P.1803 C Alighting gear compression legs.

D.H.Goblin handbook Goblin mk 3 aero engine.

A.P.1803 B Hydraulic Equipment

A.P.1464 Electrical equipment

A.P.2802A Oxygen Equipment

A.P.2656 A High Gloss finish scheme

A.P.4117A Aircraft Tanks

Mike E

www.aircraftrestorationgroup.org

We would dearly like to track down the remaining parts to enable us to build our ARC52 or PTR175 radio ground station, so we can talk to our JP crew during taxy runs.

Ideally we need a PTR175 control box (see below) and wiring harness.

Alternatively we could complete the same job with a serviceable ARC52 transciever, as we have all the other bits required already, and can exchange a working ARC52 with a perfect looking unit that is u/s.

We can travel to almost any location to liaise and finalise as we are well aware of the weight of these transcievers!

Mk 3B seat chutes

Hi Mike,

Unfortunately can’t help with ‘B’ but, according to my resource (AP127, Vol 1, part 1, sect 5, chap 5), ‘Ejection seat equipment and parachute decent, table Mk 3 seat, for the use of’………….

Parachute should be either a Mk 9 or Mk 19 fitted with a Type Z.F. harness and a Type W psp.

Hope that helps?

Regards,

Martyn

GYD

Two part question.

A what type parachute was used with martin baker 3 B elector seats

B Has anyone got any please .they do not have to be serviceable

Mike E

www.aircraftrestorationgroup.org

I’m on the lookout for a Blenheim brake lever, original or repro to have a go at this yoke. Link shows a left handed Bolingbroke example. Mine is right handed making an already difficult ask half as likely.
http://www.flickr.com/photos/dschultz742/7778842380/

Any leads on finding the funnel shaped flash eliminator from a turret mounted .303 Browning would be much appreciated please.

theres one on ebay pops up from time to time ..

Would be great to hear from anyone with a spare F52 camera or conical cone for an F24 going spare, in fact anything related to Photo recce would be very much appreciated.

Any leads on finding the funnel shaped flash eliminator from a turret mounted .303 Browning would be much appreciated please.

Viscount

The Queensland Air Museum is looking for a co-pilot’s seat (RHS) for a Viscount 700. Any leads appreciated.

Would appreciate any assistance with any of the following:

Qty 2 of 5D/535 plastic button shrouds
Qty 2 of 5CX/559 upward lamp holder
Qty 1 of Smiths E.127 12V horn
Qty 2 of Vickers A980 oil filters and its mounting brackets
Qty 4 of VGS 576/2 Air couplings
Qty 1 of Early 6D (female) oxygen cockpit connector for D type mask type male connector (sorry no part number )
Qty 1 of main spitfire canopy butterfly assembly(replica only )
Dimenional drawing of rudder pedal stanchions for spitfire
Airscrew control lever for replica spitfire throttle box
Qty 6 of A25 1/4″ x 3.5″ bolts
Qty 1 of TR9 radio controller
Qty 1 Spitfire door catch guide block
Qty 10 of Spitfire fuel tank armour spacers

Thank you for any help

Regards

Jay Elliot

Can anyone brighten my day up with a Lancaster propeller hub? Would be great to add to a display engine, any condition welcome as are DH or Hamilton blades, just need about 2 feet from the roots so would be happy to purchase damaged blades.

Thanks all.

Radio Transmitter for Westland Scout Project

Hello
Looking for a radio transmitter like the one seen here with the 2 red discs for my Westland Scout project, not sure of the actual make and model(anybody know?) but it was probably made by the firm “Plessey”? I assume that this type of radio would have been fitted to a number of different aircraft of the 1960’s period. Many thanks, Simon

Hi all. Would appreciate some help with the following items please:

Hunter GA.11 – Main Instrument Panel, Access Ladder

Jaguar GR.1A – Fuel Contents Indicator, IFF Control Unit, Control Column Moving Portion (the bit that connects the control grip to the column)

Lightning F.53 – Access Ladder

Cheers.

Graham

Any of these parts would be great 🙂 For a long term cockpit project – Beaufighter (click on thumbs)

– actually need about four of these ones for a couple of panels I am doing, there is one of these that I need that only goes to two..

Also, and this is a long shot, any castings from the CAC Wirraway, need some for another project, particularly for the rear fuse…

Cheers

Ewan

For Hawker Demon…
Inclinometer 6a/389 …I have a civilian metal one to swap if needed.
Oil pressure gauge…The circular style 6a/301-320
Autom Boost Control Cutout….poss 5c/898..Repro?
Knurled Knobs for the interrupter gear.
Any leads on data plates from the pilots panel.
TIA
Regards Mike

Any spare Merlin engine propeller shafts going spare for static use? Would be a very happy chap if i can find one.

Thanks.

Any FN5/ FN50 components gathering dust out there? Would be very grateful for any leads on FN5 turret parts no matter how small, mangled and rusty they are please to assist a project. Not many opportunities left to restore turrets nowadays so would really appreciate any help to try and piece one more back together.

You have a PM

John

Thanks, have replied to you and sent Ian_ a mesage too

Jay

HI everybody

Seeking someone who produces replica cockpit labels and engraved replica airframe plates.
Did hear someone on the forum does them but have no contact details

Thank you

Jay

You have a PM

John