April 6, 2017 at 5:39 pm
Good evening folks
I have a few parts in my collection that I have been unable to identify over the years and hoped that the forum may be able to assist. Thanks in advance.
Rudder: has the following stamps on it “CI TE 27” “WP B0Z” and “114 DH” (in a circle)
Writing Container: made of fibre board, stamped “41550” “87639” and “62”
Fuel Cover: front – AFT FUEL 52 GALLONS DTD 230 reverse – “BF24312” “2116” “P85” (in a circle)
Door catch: “CG52A2525” “75” (in a circle)
Trim? Back Plate: no visible markings!
Airscrew: stamped “G1” on the side lamination “A.I.D. 28K” (in a square) some unidentified letters/numbers round the front rim (just visible in the picture – may in fact say “MONO” in part) all bolts stamped “764/2” some bolts stamped “AW62” (in an oval) and finally, when it was eventually cut up and the centre hole enlarged and shaped it now appears to fit an Air Ministry Mk IIIa clock
Regards
Michael
By: VACB - 9th April 2017 at 16:48
Thanks Bruce, much appreciated.
Anyone any clues on the other parts please? Thanks.
By: Bruce - 7th April 2017 at 08:10
Your “trim” backplate is a standard teleflex cover. Fitted to many different types.
By: Bruce - 7th April 2017 at 08:09
Your rudder is an elevator, and it’s from a Chipmunk.