Thought I’d make a 2020 version, hope no one minds 🙂
My current project needs ranked by priority:
High Priority
Oil Pressure Edgewise Gauge 6A/560 (0-150lbs) x2 ((Beaufighter Inst Panel))
Fire Extinguisher Lift and Push Assembly ((Beau Panel))
P-39 Bomb Release Handle ((P-39 Original Panel))
P-39 – LH and RH console/inst panels, B-5 stick grip, any other misc cockpit parts
0-2 Rate of Climb Gauge ((RNZAF Harvard Panel))
40-300 Airspeed Gauge ((RNZAF Harvard Panel))
P-39 Fuel Gauge ((Repro Panel))
Beaufighter Cockpit Components
Medium Priority
Oxford instruments ((Oxford Panel Original))
Mirage IIIO Instrument ((Mirage Main Panels and RH Console))
Chinook Instruments ((Chook Panel 147007))
F111 Seat Headrest
Oxy Regulator for Beaufort Bombardiers Panel
CAC Kangaroo Instruments ((Future Panel based on original Fuel gauge))
US and British standard instrument mounting screws and bolts
P-39 Instruments ((For Repro panel refit due inaccuracy))
Low Priority
New Instrument Panel or Cockpit projects
Joysticks and Yokes (Non-project aircraft)
US and British Instruments (Non-project)
Strikemaster 6 pack instruments
By: Nicko - 22nd June 2021 at 08:49
I’m guessing no one started a 2021 version… it’s so quiet, but probably not much point with so few listings…
Below is a photo showing the status of my DH.108 panels. Since making the centre top panel, I realised from the original photo that the RI compass should actually be mounted on a little bracket that sets it off the panel; that solves a major problem when considering the windscreen structure so I am happy about that.
Anyway, what I need:
UNDERCARRIAGE POSITION INDICATOR 5C/1009 (NOSE GEAR TYPE)
OIL PRESSURE GAUGE 6A/1563
6A/1597 6A/601 Pressure Gauge Mk VIIIG Fuel
RADIO CONTROLLER TYPE 12 10L/XXX (TR-1464, but earlier types as well)
For the RI Compass, I would like one that dates from around 1950; the one I have installed dates from a much later GA type.
I have many items for trade. See this web page: http://vhjet.com/home/help-needed/ and select the TRADE ITEMS link – it is for a pdf.
Cheers!
By: FarlamAirframes - 27th September 2020 at 15:25
I picked up these Sea Vixen Mk 2 parts at an auction all from XN691.
Any use to anyone ?
By: XX466 - 30th May 2020 at 21:53
Hi all, I’ve finally got my T7 Hunter into my workshop and I’m now looking for trestle support for the back and front of the cockpit. Any help would be appreciated.
By: Wet-Dog - 21st April 2020 at 22:32
I have some Boeing 737 control yokes, ideally looking to swap for other control yokes or alternatively tail fins / rudders, wooden props etc.
By: Wyvernfan - 21st April 2020 at 19:19
Looking to swap or exchange my Canberra B.2 / T.22 as removed Control column and wheel for an original RAF / RN nose/ tail art panel, preferably Vulcan, Jaguar, Harrier / Sea Harrier depicting a squadron badge or emblem as removed from the aircraft.
The Control column was removed at RAF Wyton when the Canberra Fleet was scrapped and is believed to be ex 231 OCU. It comes fitted to a wooden display base which can be removed.
By: BPAG - 4th April 2020 at 10:42
The British Phantom Aviation Group are currently sourcing F-4 parts. Happy to hear from anyone with anything relevant to sell or trade. Please get in touch with BPAGinfo@gmail.com
Sign In
April 4, 2020 at 9:57 am