May 16, 2011 at 11:15 am
Hi
Does anyone have a Weymann hand pump or drawings for same ? “see top middle of attached photo”, as I am looking for one to attach to my Snipe repro.
Cheer’s.
Bob. T
By: sopwith.7f1 - 17th May 2011 at 09:50
The pictures work ok now.
I found this but Weymann with two nn,s rather than Weyman, its a French company that made fuel systems for cars and aircraft. It might just be a coincidence. http://aerophile.over-blog.com/article-l-alimentation-des-moteurs-d-aviation-en-1920-69144604.htmlRichard
Hi Richard
Many thanks for the info, you are right about it being Weymann & not Weyman :o, it would deffinately fit, as the Snipe used French Badin fuel system parts, I just hope I can find one or at least the drawings for it.
Cheer’s.
Bob. T
By: pogno - 16th May 2011 at 22:49
The pictures work ok now.
I found this but Weymann with two nn,s rather than Weyman, its a French company that made fuel systems for cars and aircraft. It might just be a coincidence. http://aerophile.over-blog.com/article-l-alimentation-des-moteurs-d-aviation-en-1920-69144604.html
Richard
By: sopwith.7f1 - 16th May 2011 at 20:45
Hopefully these photo’s will be a bit clearer , the rotary hand pump is near enough central in the photo’s “above left of the throttle”.
Cheer’s.
Bob. T
By: sopwith.7f1 - 16th May 2011 at 13:28
Hi Richard
Not sure why you can’t enlarge the photo, I’ll try to add another later to see if that’s any better.
Cheer’s.
Bob. T
By: pogno - 16th May 2011 at 13:09
Bob
I dont know if its just me but I cannot get an enlarged version of this picture, usually just have to click on it and it gets bigger.
Richard