dark light

Creaking Door

Forum Replies Created

Viewing 15 posts - 9,391 through 9,405 (of 12,419 total)
  • Author
    Posts
  • in reply to: DC3 Piston rings #1093199
    Creaking Door
    Participant

    I’ve got R2800 pistons that look exactly like that…

    Yep, not exactly much variety with design of large American aero-engine pistons! 😀

    in reply to: DC3 Piston rings #1093680
    Creaking Door
    Participant

    …I am trying to get a complete set of different pistons from the different aircraft I have flown in…

    What aircraft are on the list, if you don’t mind me asking? 🙂

    in reply to: The untold Battle of Britain #1093692
    Creaking Door
    Participant

    Fascinating, I had no idea that the squadrons were paid for by the government in exile; that does throw a different light on the situation. I’m not really sure I understand the difference between the Polish government in exile and the Free French other than perhaps the Vichy government kept their gold reserves in France and the Poles somehow managed to get theirs to Britain (or elsewhere).

    I’d be very interested in the book, but then buying it is a whole lot easier than actually getting around to reading it!

    in reply to: DC3 Piston rings #1094454
    Creaking Door
    Participant

    Is there any particular reason that you wanted to display an R-1830 piston?

    The ‘master’ connecting-rods for the R-1830 are particularly impressive if you can get hold of one.

    in reply to: A career in Historic aviation #1094463
    Creaking Door
    Participant

    Thanks guys, I’ve taken your advice, and good advice it is. I’ve also taken your advice on my writing, and I hope to improve it. I do try hard to get things right, I even try to get things right on Facebook…

    Much better! Sorry to pick you up on you writing but it is important and it is probably the first impression any potential employer will get; if your peers think ‘Facebook speak’ is acceptable that will only help you stand out!

    I can’t really add much to the advice only that with 50% of school-leavers now getting degrees be careful if you decide to take that route. It is very important what degree you get and from where you get it; the government may think that any degree is a degree (because it makes their figures look good) but most employers are not fooled.

    Maybe take a year out to do some voluntary work, as others have suggested; you’ll probably find it much more affordable now (time and money wise) that you will at any point until you retire! 🙂

    in reply to: A career in Historic aviation #1094468
    Creaking Door
    Participant

    You are getting lost of good advice…

    Do you have a vacancy for a proofreader? :diablo:

    in reply to: A career in Historic aviation #1094476
    Creaking Door
    Participant

    Creaking Door its the badly spelled WAS at the bottom of every post you make.

    Actually that’s my nickname, short for Warren, pronounced ‘woz’ but I could never bring myself to write it like that!

    The ‘$’ symbol came about because of a computer exercise in about 1983 when I had to use a ‘string’ (text) variable for my name; instead of ‘NAME$’ I used my initials and it looked so much like my nickname it just stuck.

    in reply to: Polishing Aluminium (Merlin) Parts. #1096356
    Creaking Door
    Participant

    If it’s old & either silver or gold, it’s probably Cad…

    So that’s what that soft shiny non-corroding plating is!

    I’m worried now that sometimes I’ve gone at this stuff with a wire brush or grinder and breathed in the dust. 😮

    From Wikipedia:

    Inhaling cadmium-laden dust quickly leads to respiratory tract and kidney problems which can be fatal (often from renal failure). Ingestion of any significant amount of cadmium causes immediate poisoning and damage to the liver and the kidneys. The kidneys lose their function to remove acids from the blood in proximal renal tubular dysfunction. The kidney damage inflicted by cadmium poisoning is irreversible.

    in reply to: The untold Battle of Britain #1096452
    Creaking Door
    Participant

    State, not government owned. :rolleyes:

    Isn’t that the same thing?

    Surely government owned, but not government controlled?

    in reply to: The untold Battle of Britain #1096490
    Creaking Door
    Participant

    Channel 4 is not government owned, nor is it part of the BBC (which, also, is not government-owned.)

    I didn’t say that it was part of the BBC.

    How would you describe it? This from Wikipedia:

    Channel 4 is a UK public-service television broadcaster which began working on 2 November 1982. Although largely commercially self-funded, it is ultimately publicly owned; originally a subsidiary of the Independent Broadcasting Authority (IBA), the station is now owned and operated by the Channel Four Television Corporation, a public body established in 1990, coming into operation in 1993.

    in reply to: Polishing Aluminium (Merlin) Parts. #1096790
    Creaking Door
    Participant

    Your mention of cadmium-plating and bead-blasting has got me worried; isn’t cadmium (especially dust) highly toxic?

    Where might you find cadmium plating on an aircraft and how do you identify (and avoid) it?

    in reply to: A career in Historic aviation #1097063
    Creaking Door
    Participant

    Capital I in “if i’ve made one” perhaps ? Do i win ? 😀

    Is it the semi colon after ‘punctuation right’? :confused:

    I don’t know! 😮

    in reply to: A career in Historic aviation #1097088
    Creaking Door
    Participant

    …iv’e seen these types of jobs at Duxford, but, they want you to have degree’s in history, and i don’t really feel i need a degree to be honest, as i have read tons of books…

    Surely if those offering you the job want you to have a degree…..then you need a degree! 😉

    Also, if you are serious about going after these jobs in ‘education/research’ you will need to get your spelling and punctuation right; I know it’s only an internet forum but it is far easier to get into the habit of getting it right, than to try and get it right only when it matters!

    Good luck with your career and I hope you do find something that you enjoy doing. 🙂

    (P.S. A small prize will be given to anybody spotting a spelling or punctuation mistake in my post…..if I’ve made one! :o)

    in reply to: DC3 Piston rings #1097097
    Creaking Door
    Participant

    Here are a couple of photographs of my R-1830 piston…..at least I hope it’s an R-1830 piston! :rolleyes:

    in reply to: The untold Battle of Britain #1097282
    Creaking Door
    Participant

    I’m sure I also heard some slightly west of “mid-Atlantic” accents…

    Wasn’t Kent Canadian?

Viewing 15 posts - 9,391 through 9,405 (of 12,419 total)