Ok but wont be able to get to it for a couple of weeks as I’m away.
I sent an email to F.C. Lane and servoconnectors asking about Plessey-Breeze connectors but not heard anything back from either of them!
Guess I’ll have to try them again.

Hi Andy,
Thanks for your reply.
The trouble is I don’t know the part number of the connector so don’t know what to ask for. Your suggestion to persuade them might need someone who is eager to help and not just a storekeeper!
The T1403A was used with “Station Portable WT/RT, Portable Type 12”.
They were installed in a 6ft x 4ft tent on a frame along with the receiver Type R1224B and Power Unit Type 266.
Here below I quote the text of what was SD 0334 that later became AP2910B:

1. The Station W.T./R.T. portable Type 12 is designed to operate in conjunction with the Transportable Ground Radio Installation Types 5109/5124 referred to hereafter as the T.G.R.I.

2. Its purpose is to serve as a rear communication link to a Light Warning Set by means of which, information regarding the approach of aircraft may be passed to the base concerned.

Hi TerryP,
Many thanks for the docs.
How do I copy them to print because they are too small to read on the screen.

Hi Bruce, thanks for your quick reply.

There must be a size limit as my first attempt failed so I’ve reduced them.
The outside diameter of the shell of ten way one is 34mm and the two way one is 29mm.
Ideally would like two of the 10 pole and one of the 2 pole one.
Thanks for looking.

[ATTACH=CONFIG]260308[/ATTACH]
[ATTACH=CONFIG]260307[/ATTACH]