dark light

Jag248rpa

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 96 total)
  • Author
    Posts
  • in reply to: Merlin engine stand #810072
    Jag248rpa
    Participant

    I’m looking for drawings as well, Tony.

    Ta!

    in reply to: Hurricane Panel Help #785998
    Jag248rpa
    Participant

    Canadian Car made Hurricane instrument panels and the appropriate instruments are difficult to locate. I’ve been looking for a manifold pressure gauge for 5 years without a sniff. But, everything shows up eventually.

    Below are pictures of CCF made instrument panels for reference. The colour picture has a couple of replacements including the undercarriage indicator and the 4 switch at the bottom should be 3 switch.

    The switches should be marked “CAN” instead of “AM”.

    The Artificial Horizon should have a surround as pictured in the 3rd picture.

    Cheers,

    Ron Taylor

    [ATTACH=CONFIG]251896[/ATTACH]
    [ATTACH=CONFIG]251897[/ATTACH]
    [ATTACH=CONFIG]251898[/ATTACH]

    in reply to: Canadian Car Foundry part. Hurricane ? #791567
    Jag248rpa
    Participant

    This is the gun sight sun screen from a CCF made Hurricane. I have a picture somewhere that I’ll post. I’ve been looking for drawings to have one of these made for my panel project.

    [ATTACH=CONFIG]251719[/ATTACH]

    in reply to: Hawker Hurricane Instrument Panel Mount (Former #1) Wanted #799496
    Jag248rpa
    Participant

    [ATTACH=CONFIG]251385[/ATTACH] The hoop in question is the outer former that the two side panels of the instrument board are attached to.

    in reply to: Hurricane Rudder Pedal Question #831168
    Jag248rpa
    Participant

    That’s exactly what I’m looking for. Thank you for the link.

    Cheers!

    in reply to: Hurricane Rudder Pedal Question #831883
    Jag248rpa
    Participant

    Thanks Tony. I’ll give them a try.

    in reply to: Hurricane Rudder Pedal Question #832226
    Jag248rpa
    Participant

    Yes, and they are a good alternative. I’m hoping to find something with the grooves.

    Thanks

    in reply to: Hawker Hurricane Doghouse #858067
    Jag248rpa
    Participant

    No pics or details at the moment. The last time I did that someone tracked me down to my house wanting to see the project.

    Just looking for drawings at the moment and occasional parts for a Mk XII Hurricane.

    in reply to: Hawker Hurricane Doghouse #859242
    Jag248rpa
    Participant

    Still looking for Former 3A Lower and 3B Upper

    Thank you

    R

    in reply to: Hawker Hurricane Doghouse #859730
    Jag248rpa
    Participant

    Many thanks Tony!!

    Ron

    in reply to: Hawker Hurricane Doghouse #860257
    Jag248rpa
    Participant

    Found the drawing for Former #4 but still looking for Former #3B upper and lower, and the side fillets.

    Thanks

    RT

    in reply to: Hurricane Control Column Questions #891464
    Jag248rpa
    Participant

    Many thanks to Windhover and Rocketeer. The A. Std. drawings were a big help. Made the ferrules this afternoon on my lathe.

     photo IMG_1850_zpsehd5fr25.jpg

    in reply to: Hurricane Control Column Questions #891592
    Jag248rpa
    Participant

    I’m missing those A. Stds. too

    in reply to: Hurricane Control Column Questions #892253
    Jag248rpa
    Participant

    These are brilliant. Both are missing from my version of the Hawker Standards. Haven’t been able to find a complete version yet. My copy is even missing 1001, which seem to be the most common on a Hurricane. It stops at about A. STD. 1340.

    Thank you for these. They are a great help.

    Cheers,

    Ron

    in reply to: Hurricane Control Column Questions #892258
    Jag248rpa
    Participant

    There is no rush Tony. When you have time you have time.

    Kind Regards,

    Ron

Viewing 15 posts - 1 through 15 (of 96 total)