Page 2 – Key Publishing

Jag248rpa

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 96 total)

← 1 2 3 … 5 6 7 →

Author

Posts
February 21, 2016 at 7:41 pm in reply to: Hawker Font Sizes #844340

Jag248rpa
Participant

It’s very confusing. There must be several types as I’ve found a drawing with Hawker No. 4 (3/16″ high).

February 20, 2016 at 2:19 am in reply to: Hawker Font Sizes #844758

Jag248rpa
Participant

I may have to go that route.

“Hawker Size No. 8″ is .1” high
“Hawker Size No. 10 is .09” high

Keep this up and I might make my own listing.

Ron

February 20, 2016 at 12:52 am in reply to: Hawker Font Sizes #844760

Jag248rpa
Participant

Yes, that does help Ian. Thank you.
Any idea about Hawker size No. 4?

Ron

February 6, 2016 at 11:01 pm in reply to: Projects Wants And Trades 2015 #850381

Jag248rpa
Participant

Hurricane Rudder Pedals

I’m looking for a set of Hurricane rudder pedals that I can “borrow” to use as a pattern for my cockpit project. Anything borrowed will be returned once the patterns are made. Or if you have drawings for Hurricane rudder pedals that would be even better.

Many thanks

Ron

December 6, 2015 at 2:25 am in reply to: Hawker Hurricane Mk X Information Sought #894325

Jag248rpa
Participant

I have also tested known CCF Mk X centre section spar remains which report manganese alloy (DTD 138) spar booms, obviously different to the British made aircraft using nickel chromium booms (S88c). Subject to confirmation, the theory is that CCF used local materials for Mk X that were different to materials used in the UK. The link to your question is whether a RCAF AP would specify DTD138 for centre section spar boom repairs, which would be delightful to confirm, or a later RAF AP covering Mk X would do the same.

Does this mean you’ve tested the piece of centre section spar that I sent to you?

Cheers,

Ron

November 9, 2015 at 6:57 pm in reply to: Projects Wants And Trades 2015 #914740

Jag248rpa
Participant

I have a replica Spitfire or Hurricane brass gun button type spade grip for trade. Wanted in exchange Hurricane parts from cockpit area.[ATTACH=CONFIG]241842[/ATTACH]

[ATTACH=CONFIG]241843[/ATTACH]

It is crudely made and the button does not function not as good as the ones you can get these days, maybe good for a temporary display until you can afford the real thing !

Thank you but I’m only interested in an original fire button or original parts. I have an electric button from a Typhoon I believe. But the grip is from a Canadian Hurricane and I’d like to restore it to it’s original state.

Ron

November 8, 2015 at 12:59 am in reply to: Projects Wants And Trades 2015 #916222

Jag248rpa
Participant

Looking for an original brass firing button with tubes for an AH2040 spade grip restoration, complete or parts. It will be used to complete a CCF made spade grip.

Many thanks

October 19, 2015 at 11:58 pm in reply to: Projects Wants And Trades 2015 #849216

Jag248rpa
Participant

Punkah Louvres

I’m looking for a pair of Punkah Louvres for my Hurricane project. Can’t find them here in Canada. Looking for contact info of someone with a set.

Cheers,

Ron

October 17, 2015 at 1:53 am in reply to: Projects Wants And Trades 2015 #851576

Jag248rpa
Participant

Looking for parts for a static Hurricane project including the following

B.71083 – Spool for Starboard B Joint
B.120155 – Spool for Port F Joint

Thank you,

Ron Taylor

June 12, 2015 at 12:18 am in reply to: Hurricane Spade Grip Alloy? #890926

Jag248rpa
Participant

Thought I’d share photos of the first step in the restoration of my AH2040 grip. Next step is to fill in, and sand to match the original profile.

May 12, 2015 at 12:05 am in reply to: T50 & T2 Tube Association – To Arms! #913355

Jag248rpa
Participant

How many have signed up and….

How many projects have signed on and what do you think the cost will be for each project?

May 7, 2015 at 4:39 pm in reply to: Spade Grip Fire Button Drawings??? #916769

Jag248rpa
Participant

Thank you again 🙂

Cheers

May 7, 2015 at 12:28 am in reply to: Spade Grip Fire Button Drawings??? #917203

Jag248rpa
Participant

Great picture, Cornovii! Thank you. What document is this page from?

May 7, 2015 at 12:27 am in reply to: Spade Grip Fire Button Drawings??? #917205

Jag248rpa
Participant

Sorry I can’t help with size or type but would it be possible for you to take the one in the photo out and measure it up?

I tried but the valve won’t budge. 🙁

May 6, 2015 at 10:05 pm in reply to: Spade Grip Fire Button Drawings??? #917273

Jag248rpa
Participant

Anymore thoughts on the make and model of the valve now that I’ve posted a picture?

Thanks,

Ron
Author

Posts

Viewing 15 posts - 16 through 30 (of 96 total)

← 1 2 3 … 5 6 7 →