dark light
Airliner World
Combat Aircraft
AeroPlane
Flypast
Airforces
Aviation
Pcpilot
Air

med06

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 6, 2010 at 1:24 pm in reply to: Need a help with MiG-21 F-13 schematic drawing and technical operating instructions.. #2411291
    med06
    Participant

    I’m not sure about the “bulkhead” you mention,I’m thinking we are not on the same page with our terminology, possibly due to a language difference. Could you E-mail me a picture of what you have? My address is [email]donandjudy123@yahoo.com[/email].

    The wing is attached to the fuselage with help of five wing hinges to frames nr. 13,16,22,25 and 28. There is one bolt with diameter ø8mm on the frame nr. 13, two bolts ø22mm and one ø16mm on the frame nr. 16, two bolts ø30mm on the frame nr.22, one bolt ø18mm on frame nr.25 and one horizontal bolt ø12mm on the frame nr.28. See also attached picture. BTW. Donno21 described the whole procedure nicely, no big deal.

    Any chance to see your 21F?

    Regards
    M

    @ Donno:
    I think Martinez told me the answer bulkhead = frames

    @Martinez:
    Thanks for the info,
    I’ll give this materials to the team..

    September 5, 2010 at 4:43 pm in reply to: Need a help with MiG-21 F-13 schematic drawing and technical operating instructions.. #2411825
    med06
    Participant

    If the aircraft is “on it’s feet” gear down, etc. It’s pretty straightforward. support the fuselage and fold the gear, support the wing(s) with jacks / plywood, whatever. It’s best if your equipment for supporting the wings is on/has/can be on wheels. remove the wing / fuselage fairings, diss-connect the plumbing.remove the attach bolts and slide the wing(s) away from the fuselage. Should be some push-pull rods to unhook also. No big deal.

    Yep..
    I know that..
    But I need the schematic draw in which part I need to remove the mounting..
    I just know that there are 5 mountings in specific bulkhead..
    But I need the the drawing..
    Thanks for the explanation, though..

    September 4, 2010 at 6:30 pm in reply to: Need a help with MiG-21 F-13 schematic drawing and technical operating instructions.. #2412261
    med06
    Participant

    I don’t know what you mean by “dissasembling the wing”. Are you de-skinning the wing? If it’s REMOVING the wing from the airframe, perhaps I can be of assistance.

    Yup, that’s what I mean,,
    I need to remove, move the airplane to somewhere else, and install it back..

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)