Key Publishing

Krupi

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 21 total)

1 2 →

Author

Posts
March 20, 2023 at 2:25 pm in reply to: Cessna 310 Throttle – Radium Paint? #755037

Krupi
Participant

@TonyT

That would be great thank you.

Thanks for your responses chaps, just had a bit of a scare with some toggle switches I purchased (AN3022) which was making me nervous.

From pictures I have seen these spacers were covered over by a separate cover when installed on the 310, I wonder what the story is behind that.

January 26, 2021 at 1:15 pm in reply to: Your Favourite Control Column Stick/Yoke/Grip! #765289

Krupi
Participant

Thanks you.

Interestingly that looks a little bit different to what I have seen previously.

January 25, 2021 at 2:12 pm in reply to: Your Favourite Control Column Stick/Yoke/Grip! #765292

Krupi
Participant

Hi Chaps,

I am looking for a De Havilland Mosquito FB Mk.VI Fighter Stick, original or a replica.

I don’t suppose there is anybody here willing to sell?

May 8, 2017 at 4:04 pm in reply to: Replica Aircraft Parts..Where Do We Go? #830594

Krupi
Participant

Thanks Jason, unfortunately there is no equivalent RAL.

http://surfacetechonline.com/ral-colour-charts

From that website RAL 6011 looks pretty damn close.

May 8, 2017 at 1:45 pm in reply to: Replica Aircraft Parts..Where Do We Go? #830667

Krupi
Participant

I am looking at having some of my project components powder coated, does anyone here know what colour best matches the RAF interior green.

At the moment RAL 6011 looks to be the one to go for…

https://www.ralcolorchart.com/ral-6011-reseda-green

Obviously until I see the finished coating I can’t be sure.

What paint do you chaps use?

Regards,
Krupi

April 16, 2017 at 11:10 pm in reply to: Replica Aircraft Parts..Where Do We Go? #838301

Krupi
Participant

never give up oldspitty .some other bits I am making Spit and Hurri what do you guys think is there a market for them ?[ATTACH=CONFIG]252542[/ATTACH][ATTACH=CONFIG]252543[/ATTACH][ATTACH=CONFIG]252544[/ATTACH][ATTACH=CONFIG]252545[/ATTACH][ATTACH=CONFIG]252546[/ATTACH][ATTACH=CONFIG]252547[/ATTACH][ATTACH=CONFIG]252547[/ATTACH]

I am after a reproduction of the spade grip cannon button if you make one?

April 14, 2017 at 10:18 am in reply to: Replica Aircraft Parts..Where Do We Go? #839097

Krupi
Participant

The button fitted perfectly :applause:

[ATTACH=CONFIG]252561[/ATTACH]

April 2, 2017 at 7:22 pm in reply to: Replica Aircraft Parts..Where Do We Go? #776025

Krupi
Participant

Hi ReAiPa thanks for the information.

The Chassis Unit is a piece of art!

Any chance you will sell the unit’s handle separately, I don’t require the whole unit and it is rather expensive?

Thanks,
Krupi

April 1, 2017 at 2:42 pm in reply to: Replica Aircraft Parts..Where Do We Go? #776526

Krupi
Participant

Sure, I need to know the dimension of this bit here…

[ATTACH=CONFIG]252204[/ATTACH]

April 1, 2017 at 11:12 am in reply to: Replica Aircraft Parts..Where Do We Go? #776701

Krupi
Participant

Quick question ReAiPa what diameter is the metal spade grip connection?

April 1, 2017 at 10:25 am in reply to: Replica Aircraft Parts..Where Do We Go? #776715

Krupi
Participant

I just went and tried a few of my switches with a Leo Bodnar board and they worked perfectly 🙂 didn’t even have to solder just clamp them with the screws 😀

Thanks for supplying the break down 🙂

March 31, 2017 at 11:41 pm in reply to: Replica Aircraft Parts..Where Do We Go? #776909

Krupi
Participant

I foresee an immanent purchase!

Do you know how to wire the button?

I have a few MOD buttons that I need to wire however my volt reader is down 🙁

5C/898 just has two contacts

5C/543 has three!

January 9, 2017 at 8:39 pm in reply to: Replica Aircraft Parts..Where Do We Go? #817838

Krupi
Participant

Could always ask Gateguards down at Newquay. Know that they have built larger items such as exhausts and radio masts for people in the past.

Martin

Don’t suppose you know what material they work with?

January 9, 2017 at 8:38 pm in reply to: Replica Aircraft Parts..Where Do We Go? #817841

Krupi
Participant

Ive got the button assembly complete with ram buttons outer shroud back plate and rocker switch.
http://www.shapeways.com/product/Z7PL2MYZA/spitfire-rocker-button?optionId=43289517

I have already brought some pieces from you, great work by the way :applause:, unfortunately for the button I am after a metallic component.

January 8, 2017 at 9:12 pm in reply to: Replica Aircraft Parts..Where Do We Go? #818409

Krupi
Participant

I realise that this is an older thread, but we’ve just launched our website catering for exactly this problem. We have much more still to add, and new lines in progress. We are also very keen to know what else people need.

Not sure if we are allowed to give out the address here, apologies if not.

http://www.replicaaircraftparts.com

Are you planning on making a replica of the machine/cannon gun button?
Author

Posts

Viewing 15 posts - 1 through 15 (of 21 total)

1 2 →