dark light

Garry

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • in reply to: Two small Merlin engine parts ? #785027
    Garry
    Participant

    Replied !

    Garry

    in reply to: Projects Wants And Trades 2015 #864132
    Garry
    Participant

    There is Elliott,Will PM you.

    in reply to: Projects Wants And Trades 2015 #864166
    Garry
    Participant

    Hi All

    I am looking for a P51d .50cal gun mount,Have this to trade,Part from a Hurricane rudder pedal assembly,Stainless only good for pattern,But steel tube should straighten up with a little heat and tlc.[ATTACH=CONFIG]243331[/ATTACH]

    Garry

    in reply to: Replica instrument panel ID required #853432
    Garry
    Participant

    Thank you for your replies,Just stated Replica Anon as I was told that by the seller,But it is quality metal and has been laser cut.

    Garry

    in reply to: Low Level Bombsight MK1 info sought ! #879657
    Garry
    Participant

    Thank you Ross for the Info very informative.

    Air Ministry,Thank you again,Pleased it looks complete,Found a bomb release button in the shed and May consider restoring the sight and putting on the shelf.

    Was there a special mounting bracket for this sight ?

    [ATTACH=CONFIG]240571[/ATTACH]

    Garry

    in reply to: Low Level Bombsight MK1 info sought ! #881789
    Garry
    Participant

    Hi Air Ministry

    Thank you for your reply,Most helpful.
    Must admit pictures where taken in the shed,Not the best place,Took some more this morning.

    [ATTACH=CONFIG]240526[/ATTACH][ATTACH=CONFIG]240527[/ATTACH][ATTACH=CONFIG]240528[/ATTACH][ATTACH=CONFIG]240529[/ATTACH][ATTACH=CONFIG]240530[/ATTACH][ATTACH=CONFIG]240531[/ATTACH][ATTACH=CONFIG]240532[/ATTACH][ATTACH=CONFIG]240533[/ATTACH][ATTACH=CONFIG]240525[/ATTACH]

    in reply to: Lancaster Bomb Aimers' Equipment, Advice Please. #919845
    Garry
    Participant

    Hi Andy

    Thanks for the AP numbers,Will check them out.
    Your project sounds interesting and maybe something I may do at a later date.
    I have a few parts already,But will wait until I have the correct info before going any further.

    Thank you John.

    Astir 8
    Yes Please,That would be very helpfull.

    Garry

    in reply to: Lancaster Bomb Aimers' Equipment, Advice Please. #920530
    Garry
    Participant

    Hello Ian

    Thats a very nice panel you have there,I have seen three different types of this panel and not sure which is correct for the T1 sight.
    I will purchase a copy Lancaster dvd,As that may be the best option for me.
    Thank you for your reply.

    Garry

    in reply to: Unidentified Instruments. #932096
    Garry
    Participant

    Thank you.

    in reply to: Can anyone id these Hawker Stainless steel parts #932159
    Garry
    Participant

    Rod end Piece stamped SP/7M SS WN4,There is also another A number on another part A72048.

    Garry

    in reply to: Can anyone id these Hawker Stainless steel parts #932235
    Garry
    Participant

    Morning all

    Came across another part in the shed.

    Part A27050

    Garry[ATTACH=CONFIG]224251[/ATTACH][ATTACH=CONFIG]224252[/ATTACH]

    in reply to: Can anyone id these Hawker Stainless steel parts #934312
    Garry
    Participant

    Just had a quick look and found a some HA stamps

    HA117,HA25,HA89 and HA329.

    in reply to: Supermarine aviation Label #983425
    Garry
    Participant

    Hi All

    Thank you all for your help.
    walrus it is.
    Did try to upload the photos of the remaining parts,But having problems doing so.

    Garry

    in reply to: Supermarine aviation Label #986544
    Garry
    Participant

    Thanks for help so far.
    Will photo the rest of the parts when I return home.
    Sadly the last digit on the date has corroded and is unreadable.
    Unfortunatley I have no idea where these were recovered,but the bucket has a mixture of parts in some Hawker and Armstrong,Would have been nice to have the history for them.

    Garry

    in reply to: Supermarine aviation Label #987360
    Garry
    Participant

    Hi

    A couple of photos of parts to hand,Do have more but I am not at home for a few days.
    Spitfire sounds interesting.

    Garry

    [ATTACH=CONFIG]222429[/ATTACH][ATTACH=CONFIG]222430[/ATTACH][ATTACH=CONFIG]222431[/ATTACH][ATTACH=CONFIG]222432[/ATTACH][ATTACH=CONFIG]222433[/ATTACH][ATTACH=CONFIG]222434[/ATTACH]

Viewing 15 posts - 1 through 15 (of 15 total)