What is the reference number of this unit?
Drawing number
Just a thought, if you had the drawing (as stated as part of the stenciling) , it may provide clues?
I just located both lamps in a 1947 copy of the 1086. Both described as small bayonet cap and obsolete.
Having had a look at the only WW2 IPB I have, for a Canadian made Lancaster, the lamp is given as 5L/116. Given that the Canadians had their own stores reference numbering system this information may not be that useful.
What is useful is that the drawing number is given as E&I dwg 12019.
This holder is part of the Coloured Resin Recognition lamps, type A.
There are 2 lamps for the unit, 4W 12V, 5L/2075 or 4W 24V, 5L/2076.
The type B had a 6W lamp fitted.
Pretty sure I have seen a BALM catalogue at either MOTAT or RAAF museum.
I believe that the Shuttleworth collection has a copy of AP1464A, 1936.
What time frame are you wanting?
The Rotax part number for 5C/3181 is F.1503-1. A 24V, type P2.
5C/1722, has the Rotax P/N of F.1504-1.
Type P relays are described as being single pole, rated at 20A.
For 5C/1722, it is a 24V, type P1 relay.
Type P1 being normally open and the type P2 being normally closed.
Nominal coil resistance for 24V operation is 255-285 ohms and 54-68 ohms for 12V operation.
Getting your hands on an Air Ministry phone book would also help.
Andrew, I guess you do not have any names against the position titles.
If you have a rank and name, you can look up the Air Force lists for that period of time and see where people with that name worked. Usually doesn’t take too long to figure it out. That is how I got W/C Clarke.
It would take a bit longer to get his service number, as the info I have did not make any sense in this area, I didn’t think it mattered that much so I did not figure it out.
I suspect that you are referring to Wing Commander F.C. Clarke (substantive date 22 May 41), who was a member of the Deputy Directorate of Organisation (Planning), part of the Department of the Air Member for Supply and Organisation.