Key Publishing

djhill82

Forum Replies Created

Viewing 13 posts - 1 through 13 (of 13 total)

Author

Posts
March 24, 2015 at 5:47 pm in reply to: DH.104 Dove Preservation Group #871477

djhill82
Participant

Hi all,
We are restoring Dove 6, G-ANUW at East Midlands aeropark, this has been a long time coming but has recently started to take shape.
Unfortunately, she’ll never fly again, but will make a great exhibit when completed!

December 7, 2014 at 1:38 pm in reply to: Gatwick Aviation Museum #880079

djhill82
Participant

We have the percival provost WW442 at the East Midlands Aeropark 😉

December 7, 2014 at 1:35 pm in reply to: Socata Minerva Canopy required #880081

djhill82
Participant

Thanks for the leads you guy’s very much appreciated !

June 11, 2014 at 7:36 pm in reply to: New Aircraft Exhbits at UK Museums #891519

djhill82
Participant

We at the east midlands aeropark have had WW442 Percival Provost which was acquired from Gatwick A.M, and XV108 VC10 front half of the fuselage !

May 14, 2014 at 7:22 pm in reply to: BEA colour scheme #918530

djhill82
Participant

Many thanks for your info , regards, Dave.

January 17, 2014 at 11:27 am in reply to: Buccaneer P.E.C Wanted ! #1006679

djhill82
Participant

Still looking to aquire/loan the above, Many thanks :eagerness:

January 15, 2014 at 9:19 pm in reply to: Buccaneer P.E.C Wanted ! #1008238

djhill82
Participant

Agh, so you could use a Man portion PEC with a helmet for comms or you could use a PEC adapter and use a ground crew headset (The adapter is just for comms, i.e. engine runs by sooties etc)

I’ll keep my eyes open

Yeah that would be what we’d do, cheers !

January 14, 2014 at 9:28 pm in reply to: Buccaneer P.E.C Wanted ! #1009292

djhill82
Participant

Basically we are looking for the same unit in the above pic although the air filter assembly is not really needed, an u/s part would suffice as we are only trying to get the intercom system working on our bucc and would not be used for flying.
So in a nutshell, its the connector that we need that fits into the connection block fitted to the side of the seat that has the intercom cable fitted to it with the jack plug socket on the end !
Hope this makes sense !
Cheers, Dave.

January 14, 2014 at 9:31 am in reply to: Buccaneer P.E.C Wanted ! #1009794

djhill82
Participant

Hi, Yes its the bit that connects to the seat connector that I’m after, Many thanks, Dave.

January 11, 2014 at 10:17 pm in reply to: Buccaneer P.E.C Wanted ! #1011411

djhill82
Participant

Cheers guys for the info and pics, the bog standard one would suffice, whatever one we can get would be great, if seen the one on ebay and have noticed that it is gbairspares thats the seller and will make contact with him, thanks once again, Regards, Dave.

January 10, 2014 at 10:44 pm in reply to: Buccaneer P.E.C Wanted ! #1012044

djhill82
Participant

I will have to get back to you with a part number, i’ll try and find it out, Cheers
Dave.

November 19, 2013 at 8:19 am in reply to: VC10 fuselage to the Aeropark #967094

djhill82
Participant

Yes, due to the size of the vc10, maintenence to the engines and tail fin/plane would be quite difficult, we have a cherry picker to hand, but even that would not be enough to reach to the very top, its a great shame really as the back end is the more iconic part of the aircraft, but hey-ho, its just great that we have secured a short piece of her from the crusher for people to admire!!

November 18, 2013 at 10:08 am in reply to: VC10 fuselage to the Aeropark #968507

djhill82
Participant

we’ve now replaced all the windows and most of the interior panelling, next we’ve got to put a galley in place and finish tidying the interior before starting to clean up the exterior.
Author

Posts

Viewing 13 posts - 1 through 13 (of 13 total)