Is there not a guy in Italy restoring a bird dog to the air who also has a spare airframe and a lot of bits.
I seem to recall David P mentioning him last year I assume you have tried him ?.
Also there is at least one company in the states who advertise parts for them.
Mike E
Actually Mike, since you raised it, I find the attitude against the “Peoples Mosquito” and regular pottshotting against it by supporters of the “Whirlwind replica project” rather off-putting and disappointing
You are of course welcome to your opinion but might I point out I was not having a pot shot as you put it just pointing out that a comment had been made that the mossie project had an airframe and I was just clarifying what I understood to be the actual fact ??. If that is incorrect I stand corrected.
Mike E
The Mossie group have an airframe? :confused:
With respect at the risk of going off theme and being accused of sour grapes what do you call an airframe ?. I understood it was a few brackets and some very badly burnt fittings and some small wooden items ?.
The Whirlwind project currently has available to it One RR Perigrine engine,a main gear assembly,a small section of centre section with radiator intake and some odds and ends.We already have 95 % of the interior of the cockpit ready except for the main panel,control column,pilots seat and windscreen and rudder pedals we aint much short. We have two prop hubs hopefully coming from Oz (Wirrawarry ?cant spell.uses basicaly the Caribou uses a similar one).
The Lysander and a couple of other aircraft use common parts.
Mike E
I have tried three times to register and it wont let me in it asks for a password before it gives you the option of making one ??
Mike E
The best person to clarify the numbers on Merlin’s is to speak to Ian at RR Heritage .They have a full listing of every Merlin built and what it was first fitted to he should be able to tell you what is what as they are extremely helpfull.
Mike E
Thank you for the words for and against yes it is a great responsibility undertaking such a project and involves an awfull lot of research and input .Unlike others we do not object to constructive suggestions or critisism we are totally open to questions so long as it aint the same one millions of times over.
I to would like to see the Mosquito project come to fruition but to be honest I think its even more of a challenge than ours is.
Mike E
no photos forthcoming, i suspect this is an april fool
April fool on the 2nd then you have been sniffing something also.The reason there aint no photo’s is the scrap yard do not want any publishing if that is a problem for folks then sorry TOUGH !!!!!.
If and when we get told it is available for other than recycling for coke cans then we will provide more info as promised.
And no as far as we can tell it is not the art one either.
Mike E
My first thought was “I wonder if its still got its RR Vulture engine?” 😀
I think you have been sniffing something !!!:diablo::diablo::diablo:
yes please more pics
Mike E
😀 …. will it be at Cockpit-Fest?? :diablo:
why are you going to give us a good commission rate for it ???
Mike E
Its Grey it came out of RAF Leeming spares recovery in last 24 hours so the likely hood of it coming from down south to a car breakers in North Yorkshire within 10 miles of Leeming where 27 of them are being broken:diablo::diablo::diablo: is highly unlikely.
Mike E
The HM 200 series fleas are all the modern butchered and stretched ones.
mike E
Try Alan Hulme and his associate ian they had as you know an Anson cockpit section and lots of bits up in store with us in the mill at Glossop.
Also I suggest you have words with Martin Slater at Coventry they have two basket case airframes an dlot sof bits I was offered one some time ago but did not have the resource or space so it may help to contact him.
Mike E
Try Alan Hulme and his associate ian they had as you know an Anson cockpit section and lots of bits up in store with us in the mill at Glossop.
Also I suggest you have words with Martin Slater at Coventry they have two basket case airframes an dlot sof bits I was offered one some time ago but did not have the resource or space so it may help to contact him.
Mike E