dark light

BlueRobin

Forum Replies Created

Viewing 15 posts - 1,786 through 1,800 (of 2,569 total)
  • Author
    Posts
  • in reply to: Antonov AN12 cargo flight #396749
    BlueRobin
    Participant

    Good to see the big stuff using a Garmin 295 πŸ™‚

    in reply to: DC-6C at Deenethorpe #1320745
    BlueRobin
    Participant

    You could also add the Dove which accompanied ‘XC. πŸ™‚

    in reply to: Bruntingthorpe Cold War jets 2006! #554022
    BlueRobin
    Participant

    Dad went and told me about the green Jag – yuck! Smashing pics and well done for up close photos of pilots as well (we do exist inside the aircraft). Shameful Mr CAA that wheels off tarmac is not committed at such an event! The home vid showed the only flying a/c to be a Bolkow and a Gazelle (PA28 above accepted)

    in reply to: Bizzare Plane #397025
    BlueRobin
    Participant

    Let the CAA aircraft register be your friend

    http://www.caa.co.uk/ginfo

    in reply to: Convair CV580 visiting Coventry #1320783
    BlueRobin
    Participant

    I saw it today taxying on the far East side amongst the “dead” Emerald HS748 and thought it also to be a ‘748. Only when it pulled up outside on the West apron did I clock it and confirmed the reg N631MW. A rare beastie.

    Anyone know what it is doing at Coventry?

    Here are Barry’s photos (attached).

    in reply to: Ultimate High / Mazda video #397661
    BlueRobin
    Participant

    Extra vs Mazda? Flown former and driven latter. Extra every time. Are they trying to associate their boring cars with the bonkers madferrit Extra?

    in reply to: DC-6C at Deenethorpe #1334050
    BlueRobin
    Participant

    Aircraft register for SIXC shows an expired CofA and a “Change of C of A details in progress”. Am I warm?

    in reply to: Sums it up for me. #398229
    BlueRobin
    Participant

    You’ll need to elucidate :confused:

    Moggy

    How they improved on the RV6 to the RV7 (also applies to RV4 to RV8)

    But the biggest difference is the kit. Computer aided design and computer controlled production tools mean that the parts fit exactly as they should. Traditionally, the task of locating, aligning, drilling and preparing the thousands of rivet holes has fallen to the airplane builder. It’s not particularly difficult, but it is repetitious and there are many opportunities for error. In the “matched hole” RV-7/7A kit, a computerized punch press locates and punches all the rivet holes during manufacture, so the builder can pull the parts out of the box, align the holes and begin assembly immediately.

    http://www.vansaircraft.com/public/rv-7int.htm

    in reply to: Sums it up for me. #398294
    BlueRobin
    Participant

    Yes please πŸ™‚

    Moggy

    Mark A who posts here (and Ben Twings elsewhere) has one and recently completed its build.

    The RV4 is cleared for aeros in the UK too. Sounds like an ideal PFA aircraft apart from the matched hole/rivet issue. Shame the later similar models like the -8 aren’t (bureaucratically) cleared.

    in reply to: Sums it up for me. #398346
    BlueRobin
    Participant

    RV4, the V brace gives it away. Makes you want to fly one huh?

    in reply to: Sywell Airshow 24th Sept – display list updated #398721
    BlueRobin
    Participant

    Unemployed πŸ™

    How much is M.B-B taking if it’s for charity? Nowt I hope!

    in reply to: Sywell Airshow 24th Sept – display list updated #398829
    BlueRobin
    Participant

    Yeah right, dad’s favourite more like! πŸ˜€

    Any FOSA discount, TT?

    in reply to: BlueRobin #398898
    BlueRobin
    Participant

    Oops!

    First time I have had to clear out my private massages on this board and I have been registered here since forever.

    Just found a photo of moggy sat on a bench with a hot thermos looking 30 years his senior. Now if only I could photoshop in the rug onto his lap!

    in reply to: MIA #398929
    BlueRobin
    Participant

    Looks like he has gone. Hoorah.

    in reply to: Contact for Battleflat anyone? #398948
    BlueRobin
    Participant

    I know microlights use it. Try contacting the LMAC.org.uk guys at Swinford if you get stuck.

Viewing 15 posts - 1,786 through 1,800 (of 2,569 total)