Depends on your final finish to an extent but, by and large, you’re right.
Oh, noooooo.
Your not a sinner who puts wallpaper onto plasterboard are thee jimlaaaad!
Leaving the problem of removal to the next person. It’s a sin is that.
Depends on your final finish to an extent but, by and large, you’re right.
Oh, noooooo.
Your not a sinner who puts wallpaper onto plasterboard are thee jimlaaaad!
Leaving the problem of removal to the next person. It’s a sin is that.
Like we said, consider plaster-board instead…… 😀
But board still needs a skim IMO.
Like we said, consider plaster-board instead…… 😀
But board still needs a skim IMO.
Where I live they talk like that anyway!
Where I live they talk like that anyway!
Was it “Rosy the Riveter” on the US campaign stuff?
These are great shots, very studio like.
I’ll go along with that. Far more gain, far less pain. :diablo:
Plastering is easy once you’ve got the confidence to give it a try. The worst that can happen is that you make a mess of it……so hammer it off.
Get the mix right, should be a little thinner (Wetter) than mashed potato.
Get it on the wall as fast as possible. You have a 15 minute window.
Once wall is covered, spread it using arcs of arm movement.
Once it is nearly flat and about 3mm thick, leave it until you can press it with your finger tips and leave no impression….nor get plaster on your fingers.
Now polish it with a good float. Add water carefully with a big emulsion brush, or a spray.
But, as you haven’t done it before, you will not have a good float. A new one will be rubbish as it will be dead flat. New ones need breaking-in on other jobs like sand-cement render etc.
Good luck, if you can’t get it flat then make it an obvious pattern! 🙂
I’ll go along with that. Far more gain, far less pain. :diablo:
Plastering is easy once you’ve got the confidence to give it a try. The worst that can happen is that you make a mess of it……so hammer it off.
Get the mix right, should be a little thinner (Wetter) than mashed potato.
Get it on the wall as fast as possible. You have a 15 minute window.
Once wall is covered, spread it using arcs of arm movement.
Once it is nearly flat and about 3mm thick, leave it until you can press it with your finger tips and leave no impression….nor get plaster on your fingers.
Now polish it with a good float. Add water carefully with a big emulsion brush, or a spray.
But, as you haven’t done it before, you will not have a good float. A new one will be rubbish as it will be dead flat. New ones need breaking-in on other jobs like sand-cement render etc.
Good luck, if you can’t get it flat then make it an obvious pattern! 🙂
Corrupt, gun loving homephobe with an unmarried pregnant daughter named… ‘Bristol’ :confused: sounds perfect for the job! :rolleyes:
Corrupt?
Find a person in Politics that isn’t!!!! Then shoot them before they turn bad.
Gun Loving?
USA statute. Change the law if it isn’t liked.
Unmarried, pregnant daughter?
Big deal.
You’ll have to discount most of the HoParliament and the HoReps/Senate if the three subjects you mention are “Not good for public office”
Next time I vote, I shall vote for whichever candidate pays me £10. I can join the corruption game. Party is no matter.
Or, a good looking one (Female of course) it doesn’t matter to me who gets in, the problems and issues will always be the same.
Anyway, back to gals in politics……who is the labour looker? She’s a minister too I think.
Corrupt, gun loving homephobe with an unmarried pregnant daughter named… ‘Bristol’ :confused: sounds perfect for the job! :rolleyes:
Corrupt?
Find a person in Politics that isn’t!!!! Then shoot them before they turn bad.
Gun Loving?
USA statute. Change the law if it isn’t liked.
Unmarried, pregnant daughter?
Big deal.
You’ll have to discount most of the HoParliament and the HoReps/Senate if the three subjects you mention are “Not good for public office”
Next time I vote, I shall vote for whichever candidate pays me £10. I can join the corruption game. Party is no matter.
Or, a good looking one (Female of course) it doesn’t matter to me who gets in, the problems and issues will always be the same.
Anyway, back to gals in politics……who is the labour looker? She’s a minister too I think.
Actually there’s more than 4 Old shape,
Norway has at least one………..
Inger-Lise Hansen,
Christian Peoples Partycheers,
-John
A bit lopsided, that boat.
And “Christian”…..that’s no good for a Pinnochio relationship!
Actually there’s more than 4 Old shape,
Norway has at least one………..
Inger-Lise Hansen,
Christian Peoples Partycheers,
-John
A bit lopsided, that boat.
And “Christian”…..that’s no good for a Pinnochio relationship!
This is self-evidently the case.
Otherwise you would surely have included Rachida Dati, France’s Ministre de la Justice, in your list.
And who do we get as Justice Minister? Jack Straw, that’s who! 🙁
Nah, she’d have to pay me.
This is self-evidently the case.
Otherwise you would surely have included Rachida Dati, France’s Ministre de la Justice, in your list.
And who do we get as Justice Minister? Jack Straw, that’s who! 🙁
Nah, she’d have to pay me.