Minor point on MH367. FL-A are the displayed code letters (NZer Colin Gray’s 81 Sqn machine in North Africa), its registration is ZK-WDQ.
For a moment I thought the Mossie was KA114!
Good news, wings off, waiting for the grass to dry before moving over to Pioneer Aero. It has been very wet the last couple of weeks, with another ex-cyclone expected Wed-Thur.
http://www.pioneeraero.co.nz/2017/04/07/b-170/
Currently it is almost opposite Ardmore Cafe, in the paddock that is 551 Harvard Lane. Pioneer is on the other side of the runway, 540 Corsair Lane. They can probably avoid having to remove any fence posts.
Further update, with a complete temporary covering over the Sunderland to allow work to continue under shelter, there are no uncovered aircraft at MOTAT – first time in 50 years!
I was on a recent FlyDC3 flight that swung by on a regular scenic, so got a good view from above.
No uncovered aircraft at MOTAT by Errol Cavit, on Flickr
From top to bottom, the older display hall (which includes the Lancaster) connects to the new display hall (Solent and more), the Sunderland, and the restoration hangar. Various storage shed to the right, with railway sheds at the far right.
Commentary from MOTAT volunteer emron:
http://rnzaf.proboards.com/post/250120/thread
… Yes and it’s taken well over 50 years to get them all under cover. But there’s still a way to go before everything is permanently housed. No.3 down the row of sheds behind the Sunderland tail is the old Aviation Workshop, one of the first buildings on the site and constructed about 1980. That was first occupied by the Hudson project that Barrie East started restoring before he passed away in 1984. Many other jobs went through that shop before the present workshop was opened. Recently it has been used for storage and over summer was cleared out to prepare for stowing both the Lodestar and the Ventura. The Lodestar has already been disassembled, sprayed with preservative and moved in. Today the left wing of the Ventura was detached. This revealed the creative lengths Barrie East and others had gone to so a Lodestar wing could fit a Ventura centre section. That was all done back in earlier times, out in the open paddock before any buildings were on site. Anyway the wing was removed without too much drama and the right wing should follow by next weekend. The new tyres have been fitted to the wheels and are back from the shop. So they can be swapped onto the Ventura once both wings are off. Then it will be mobile again and be towed over to join the Lodestar.
This will then leave space in the main workshop for the DC3 to be moved in so that a long deferred restoration program can be completed.
The DC-3 is currently in the new display hall, and has been pushed outside a number of times to enable events under the Solent.
Several still fly in Australia and NZ – only on wheels!
ArdmoreSMA14_8983flr by Errol Cavit, on Flickr
Added: Another example, currently without insignia (but nice potted history attached).
http://rnzaf.proboards.com/post/249610/thread
Thanks for sharing the logbook.
The TAF squadrons only had a few P-51s each, so the boss must have held on to ‘his’ tight!
Some bonus air-to-airs of NZ1024 from Gavin Conroy
http://classicaircraftphotography.com/gallery/2016-harvard-nz1024-air-2-air-in-australia/#/gallery/2016-harvard-nz1024-air-2-air-in-australia/a63w9724/
Did he fly a BE.2 in training or on earlier operations? Stow Maries may be amenable?
And just for completeness, there is the other TVAL reproduction, now operated by TAVAS in Queensland.
The thought of three at one time is just amazing!
Some historians refer to ‘zombie myths’ – assertions that are embedded enough in the culture that they remain there, even if there is clear proof, widely available, that they are wrong.
Baz, you the one that made the Freighter taxi again a few years ago? What’s it’s current status?
I’m not Baz, but it taxi-ed at the last Omaka show (2015), and I would say it’s looking hopeful for this Easter too.
FB photo
Brendon Deere doesn’t have as much money as the Queen, and his Spitfire PV270 has an authentic finish which is weathering nicely (if not in quite the same fashion as an in-service machine).
“AL” Deere Spitfire by Errol Cavit, on Flickr
Paul McSweeney from Pioneer Aviation at Ardmore said on the WONZ Warbirds Radio show that the RNZAF personnel involved are volunteers, and that once they have taken the wings off further work will be done at Pioneer before shipping.
http://www.warbirdradio.com/2017/03/wings-over-new-zealand-live-restorer-paul-mcsweeny-31417-9pm-et/
More dismantling photos from a different source.
http://mrcaviation.blogspot.com/2017/03/bristol-freighter-nz5911zk-epg-update.html
And there are some interior photos in a subsequent post at nzcivair.blogspot.com
You could always come to Omaka and see ZK-CPT! I hope we get a taxi this year.
Omaka Bristol Freighter with fresh engine by Errol Cavit, on Flickr
I’m not sure this will answer the question, but if you have an ID, you can repair the aircraft, even if you don’t start with much. If you state that the aircraft is new, then you need manufacturing approvals, which is a whole,different ball game. Semantics, I know.
It’s semantics with significant impacts in practice.
Note that The Vintage Aviator Ltd is a certified Aircraft Manufacturer.
http://thevintageaviator.co.nz/about-us
Certification
NZCAA part 148 (manufacturing)
The Vintage Aviator Ltd is approved to manufacture aircraft components under the following ratings:
M1 – manufacture aircraft
M2 – manufacture aircraft components
M3 – manufacture parts or appliances
APPROVED MAGNETIC PARTICLE INSPECTION
APPROVED DYE PENETRANT INSPECTION
APPROVED EDDY CURRENT INSPECTION